The Forward Look Network | ||
| ||
'57-'59 Power Windows plastic connectors Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> For Sale - PARTS | Message format |
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello, I am reproducing the plastic connectors for Power Window switches through 3D printing, using a method known as Selective Laser Sintering. The parts are made of polyamide (PA 2200) and are very accurate, identical to the original ones. The prices are : Master switch : $33.00 Single switch : $9.00 Shipping is $8.00 worldwide (up to 2 master and 6 single switches), with tracking information provided. I have made some research concerning the interchangeability of those parts, using the '55-'58, '59, '60 and '61 parts catalogs. Those parts are known under references 1779276 (master) and 1779268 (single), but only for the '57-'58 cars. Most probably, they were only serviced (and therefore referenced) during those years and they were included with the wiring or the switches after that. Based on the references of the switches and the wiring, I was able to cross-reference some of their use. I may be missing some applications, but here's what I've been able to gather so far: Master switch connector Electric Window Lift 1957 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial 1958 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial 1959 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial Single switch connector Electric Window Lift 1957 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial 1958 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial 1959 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial Electric Door Lock 1958 All - 2 per car - Imperial 1959 All - 2 per car - Imperial Electric Seat Adjuster 1957 All - 1 per car - Plymouth 1958 All - 1 per car - Plymouth 1959 All - 1 per car - Plymouth Tailgate Electric Window Lift 1957 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler 1958 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler 1959 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler I manufacture them by batch, so there may be some delay when ordering, if I have to launch a new one. If you are interested, please let me know in this thread, write me a PM or an e-mail at "powerwindows at orange.fr" Thank you. (DSC02189.JPG) (DSC02193.JPG) (DSC02191.JPG) Attachments ---------------- DSC02189.JPG (123KB - 346 downloads) DSC02193.JPG (182KB - 335 downloads) DSC02191.JPG (161KB - 320 downloads) | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | I have launched the production of the second batch. The parts should be ready for shipment by early November. Edited by Chrome58 2016-10-14 9:14 AM | ||
billy |
| ||
Extreme Veteran Posts: 395 Location: upstate new york | Chrome58, Will you have extras out of your next batch to sell? I am interested... Thanks, billy | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hi Billy, Yes there's still connectors available on the 2nd batch. Please send me a PM with your order, your email and your postal address. Thank you. | ||
shortmort |
| ||
Regular Posts: 93 Location: Upper Darby, PA | Hi Vincent, Are you still producing these? I've PM'd you and emailed you (two addresses) - but not heard back. I don't mind waiting, I just would like to get confirmation that I can get in on this. Thanks Dan www.59plymouth.net | ||
sermey |
| ||
Expert Posts: 1208 Location: SWITZERLAND | Here you did a perfect Job, Vincent. It looks very nice! For not get heated and consequently the plastic get partly melted due to bad contacts, these should be http://www.forwardlook.net/forums/forums/thread-view.asp?tid=23691&start=153 Edited by sermey 2016-12-03 4:03 AM (05 - Connectors mounted.jpg) Attachments ---------------- 05 - Connectors mounted.jpg (98KB - 337 downloads) | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello, I still have in stock : 6 master switch connectors and 23 single ones. Thank you. | ||
Powerflite |
| ||
Expert 5K+ Posts: 9666 Location: So. Cal | I'll take a set of them: 1 master, and 3 singles. Do you have a paypal account? | ||
Doctor DeSoto |
| ||
Location: Parts Unknown | I would also like a set. How can I pay you ? | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hi, Yes I do have a Paypal account. Nathan, I'm sending you an e-mail. Doctor DeSoto, I'm sending you a PM. Thanks. Edited by Chrome58 2017-02-12 4:20 AM | ||
Phatton |
| ||
Veteran Posts: 174 Location: Camptown PA | I'm looking for the master for a 1960 dodge - these look pretty close - do you know if it will fit? Thanks | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Phatton - 2017-02-12 7:15 PM I'm looking for the master for a 1960 dodge - these look pretty close - do you know if it will fit? Thanks It WILL fit, but as far as I know, the '60-up connector is made of two pieces. Therefore, I think the cover will not fit, you probably will need to make a new one. | ||
sa-noia |
| ||
Member Posts: 42 | I have a 57 300C with power windows. Are the parts offered still available? One main and three single gangs. Do you have the connectors availability for the wires going to them? I've ordered a complete power window wiring harnesses from Greg Leggatt and not sure just what's included. Please forward your information on what's available and pricing with your billing information. What is the lead time? My email is "sa-noia@PacBell.net". Thanks in advance. | ||
LD3 Greg |
| ||
Expert Posts: 1906 Location: Ontario, Canada | Stephen, I sent you an email. Greg | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello, Stephen. Yes, those parts are still available. I sent you an email. | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Well, my current batch of parts is sold out ... I'm pondering about producing a third batch, as so far I have only 2 pre-orders. If you're interested, now is the time to let me know. PS : Brent (Doctor DeSoto) and Stephen (sa-noia), please confirm your order, because I did not receive any answer from my recent messages to you. Edited by Chrome58 2017-02-26 2:19 PM | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hi everyone, Just to let you know I made a third batch a while ago. I've got about a dozen sets available right now. Thanks. | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hi everyone, I've got the equivalent 6 sets left in stock. I probably won't make a 4th batch before a long time. So if you are interested by a set, or individual connectors, please let me know. Thanks. | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hi everyone, I'm launching the production of a new batch. If you are interested, please e-mail me at "powerwindows [at] orange [dot] fr", or PM me. Thanks. Edited by Chrome58 2018-10-30 3:02 PM | ||
christine-lover |
| ||
Expert Posts: 2996 Location: Sept. 1958 | Did you ever get enough orders together to do a run for the 60-64? | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | christine-lover - 2018-10-30 11:05 PM Did you ever get enough orders together to do a run for the 60-64? No, there was not enough interest, even though I advertised it across 2 forums. Which is a shame, because I had designed an hybrid connector compatible with all years. | ||
Phatton |
| ||
Veteran Posts: 174 Location: Camptown PA | Why not just produce your hybrid connector and sell it to everyone needing a connector? | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Phatton - 2018-10-31 10:12 PM Why not just produce your hybrid connector and sell it to everyone needing a connector? No, I meant an hybrid connector which is compatible with all years from '60 to '64. There was small (and sometimes not so small) differences between each year during that period. | ||
christine-lover |
| ||
Expert Posts: 2996 Location: Sept. 1958 | Chrome58 - 2018-10-31 5:33 AM christine-lover - 2018-10-30 11:05 PM Did you ever get enough orders together to do a run for the 60-64? No, there was not enough interest, even though I advertised it across 2 forums. Which is a shame, because I had designed an hybrid connector compatible with all years. :o That's what I had read but didn't know if it changed. Thanks. | ||
billy |
| ||
Extreme Veteran Posts: 395 Location: upstate new york | Vincent, Sent you a email today... billy | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | billy - 2018-11-08 5:55 PM Vincent, Sent you a email today... billy Billy, I have replied. | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello, If you ever need a set, or just single ones, do not wait ! My current production batch is already 80% pre-sold, I have 4 sets left. And I'm not sure when I'll do the next one ... | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello everyone, It's time to see if I might launch a new batch in production. So now is the time to let me know if you ever need a set, or even individual connectors Thank you. Edited by Chrome58 2019-11-28 2:25 PM | ||
shortmort |
| ||
Regular Posts: 93 Location: Upper Darby, PA | Vincent, mine worked perfectly! http://59plymouth.net/59forum/viewtopic.php?f=47&t=2722&start=840#p... Thanks so much Dan | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | shortmort - 2019-11-28 8:33 PM Vincent, mine worked perfectly! http://59plymouth.net/59forum/viewtopic.php?f=47&t=2722&start=840#p... Thanks so much Dan Thank you, Dan, for your feedback and the pictures | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello everyone, Just this message to tell you that I have launched a new batch in production. So if you need a set of connectors, or single ones, sent me an e-mail at : powerwindows (at) orange (dot) fr Thank you. Edited by Chrome58 2021-05-15 4:20 AM | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | Hello everyone, I have a few sets left from the previous batch. So if you need a set of connectors, or single ones, sent me an e-mail at : powerwindows (at) orange (dot) fr Thank you. | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | I have 1 set available from the last batch. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |