The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

'57-'59 Power Windows plastic connectors
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> For Sale - PARTSMessage format
 
Chrome58
Posted 2016-10-14 8:36 AM (#523412)
Subject: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello,

I am reproducing the plastic connectors for Power Window switches through 3D printing, using a method known as Selective Laser Sintering. The parts are made of polyamide (PA 2200) and are very accurate, identical to the original ones. The prices are :

Master switch : $33.00
Single switch : $9.00

Shipping is $8.00 worldwide (up to 2 master and 6 single switches), with tracking information provided.

I have made some research concerning the interchangeability of those parts, using the '55-'58, '59, '60 and '61 parts catalogs. Those parts are known under references 1779276 (master) and 1779268 (single), but only for the '57-'58 cars. Most probably, they were only serviced (and therefore referenced) during those years and they were included with the wiring or the switches after that. Based on the references of the switches and the wiring, I was able to cross-reference some of their use.

I may be missing some applications, but here's what I've been able to gather so far:

Master switch connector
Electric Window Lift
1957 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1958 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1959 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial

Single switch connector
Electric Window Lift
1957 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1958 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1959 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial

Electric Door Lock
1958 All - 2 per car - Imperial
1959 All - 2 per car - Imperial

Electric Seat Adjuster
1957 All - 1 per car - Plymouth
1958 All - 1 per car - Plymouth
1959 All - 1 per car - Plymouth

Tailgate Electric Window Lift
1957 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
1958 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
1959 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler


I manufacture them by batch, so there may be some delay when ordering, if I have to launch a new one.
If you are interested, please let me know in this thread, write me a PM or an e-mail at "powerwindows at orange.fr"

Thank you.



(DSC02189.JPG)



(DSC02193.JPG)



(DSC02191.JPG)



Attachments
----------------
Attachments DSC02189.JPG (123KB - 342 downloads)
Attachments DSC02193.JPG (182KB - 332 downloads)
Attachments DSC02191.JPG (161KB - 318 downloads)
Top of the page Bottom of the page
Chrome58
Posted 2016-10-14 9:13 AM (#523414 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
I have launched the production of the second batch.
The parts should be ready for shipment by early November.

Edited by Chrome58 2016-10-14 9:14 AM
Top of the page Bottom of the page
billy
Posted 2016-10-21 12:13 PM (#523989 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Extreme Veteran

Posts: 395
100100100252525
Location: upstate new york
Chrome58,
Will you have extras out of your next batch to sell? I am interested...
Thanks,
billy
Top of the page Bottom of the page
Chrome58
Posted 2016-10-21 12:53 PM (#523993 - in reply to #523989)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hi Billy,
Yes there's still connectors available on the 2nd batch.
Please send me a PM with your order, your email and your postal address.
Thank you.
Top of the page Bottom of the page
shortmort
Posted 2016-12-02 7:33 PM (#527758 - in reply to #523993)
Subject: Re: '57-'59 Power Windows plastic connectors



Regular

Posts: 93
252525
Location: Upper Darby, PA
Hi Vincent,

Are you still producing these? I've PM'd you and emailed you (two addresses) - but not heard back. I don't mind waiting, I just would like to get confirmation that I can get in on this.

Thanks
Dan
www.59plymouth.net
Top of the page Bottom of the page
sermey
Posted 2016-12-03 4:00 AM (#527773 - in reply to #523412)
Subject: RE: '57-'59 Power Windows plastic connectors


Expert

Posts: 1208
1000100100
Location: SWITZERLAND

Here you did a perfect Job, Vincent. It looks very nice!

For not get heated and consequently the plastic get partly melted due to bad contacts, these should be
restored as well, as shown here. The highest current is achieved at the windows end position, when there is no
interruptor. - SERGE -

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=23691&start=153



Edited by sermey 2016-12-03 4:03 AM




(05 - Connectors mounted.jpg)



Attachments
----------------
Attachments 05 - Connectors mounted.jpg (98KB - 335 downloads)
Top of the page Bottom of the page
Chrome58
Posted 2017-02-11 4:07 AM (#533741 - in reply to #523412)
Subject: RE: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello,

I still have in stock : 6 master switch connectors and 23 single ones.

Thank you.
Top of the page Bottom of the page
Powerflite
Posted 2017-02-11 10:25 PM (#533802 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I'll take a set of them: 1 master, and 3 singles. Do you have a paypal account?
Top of the page Bottom of the page
Doctor DeSoto
Posted 2017-02-11 11:39 PM (#533808 - in reply to #533802)
Subject: Re: '57-'59 Power Windows plastic connectors



5000500050005000200050025
Location: Parts Unknown
I would also like a set. How can I pay you ?
Top of the page Bottom of the page
Chrome58
Posted 2017-02-12 4:16 AM (#533812 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hi,

Yes I do have a Paypal account.

Nathan, I'm sending you an e-mail.
Doctor DeSoto, I'm sending you a PM.

Thanks.

Edited by Chrome58 2017-02-12 4:20 AM
Top of the page Bottom of the page
Phatton
Posted 2017-02-12 1:15 PM (#533843 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors


Veteran

Posts: 174
1002525
Location: Camptown PA
I'm looking for the master for a 1960 dodge - these look pretty close - do you know if it will fit? Thanks
Top of the page Bottom of the page
Chrome58
Posted 2017-02-13 11:11 AM (#533907 - in reply to #533843)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Phatton - 2017-02-12 7:15 PM

I'm looking for the master for a 1960 dodge - these look pretty close - do you know if it will fit? Thanks

It WILL fit, but as far as I know, the '60-up connector is made of two pieces.
Therefore, I think the cover will not fit, you probably will need to make a new one.

Top of the page Bottom of the page
sa-noia
Posted 2017-02-15 10:22 AM (#534071 - in reply to #533907)
Subject: Re: '57-'59 Power Windows plastic connectors


Member

Posts: 42
25
I have a 57 300C with power windows. Are the parts offered still available? One main and three single gangs. Do you have the connectors availability for the wires going to them? I've ordered a complete power window wiring harnesses from Greg Leggatt and not sure just what's included. Please forward your information on what's available and pricing with your billing information. What is the lead time? My email is "sa-noia@PacBell.net". Thanks in advance.
Top of the page Bottom of the page
LD3 Greg
Posted 2017-02-15 11:11 PM (#534110 - in reply to #534071)
Subject: Re: '57-'59 Power Windows plastic connectors


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada
Stephen, I sent you an email.

Greg
Top of the page Bottom of the page
Chrome58
Posted 2017-02-16 3:19 AM (#534117 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello, Stephen.
Yes, those parts are still available.
I sent you an email.
Top of the page Bottom of the page
Chrome58
Posted 2017-02-26 2:17 PM (#534740 - in reply to #533808)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Well, my current batch of parts is sold out ...
I'm pondering about producing a third batch, as so far I have only 2 pre-orders.

If you're interested, now is the time to let me know.


PS : Brent (Doctor DeSoto) and Stephen (sa-noia), please confirm your order, because I did not receive any answer from my recent messages to you.

Edited by Chrome58 2017-02-26 2:19 PM
Top of the page Bottom of the page
Chrome58
Posted 2017-06-29 2:41 PM (#543148 - in reply to #534740)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hi everyone,

Just to let you know I made a third batch a while ago.
I've got about a dozen sets available right now.

Thanks.
Top of the page Bottom of the page
Chrome58
Posted 2017-11-29 5:50 AM (#553355 - in reply to #543148)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hi everyone,

I've got the equivalent 6 sets left in stock.

I probably won't make a 4th batch before a long time.

So if you are interested by a set, or individual connectors, please let me know.

Thanks.
Top of the page Bottom of the page
Chrome58
Posted 2018-10-30 3:01 PM (#572627 - in reply to #553355)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hi everyone,

I'm launching the production of a new batch.

If you are interested, please e-mail me at "powerwindows [at] orange [dot] fr", or PM me.

Thanks.


Edited by Chrome58 2018-10-30 3:02 PM
Top of the page Bottom of the page
christine-lover
Posted 2018-10-30 5:05 PM (#572635 - in reply to #572627)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 2996
2000500100100100100252525
Location: Sept. 1958
Did you ever get enough orders together to do a run for the 60-64?
Top of the page Bottom of the page
Chrome58
Posted 2018-10-31 5:33 AM (#572666 - in reply to #572635)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
christine-lover - 2018-10-30 11:05 PM

Did you ever get enough orders together to do a run for the 60-64?

No, there was not enough interest, even though I advertised it across 2 forums.
Which is a shame, because I had designed an hybrid connector compatible with all years.
Top of the page Bottom of the page
Phatton
Posted 2018-10-31 4:12 PM (#572691 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors


Veteran

Posts: 174
1002525
Location: Camptown PA
Why not just produce your hybrid connector and sell it to everyone needing a connector?
Top of the page Bottom of the page
Chrome58
Posted 2018-10-31 4:15 PM (#572692 - in reply to #572691)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Phatton - 2018-10-31 10:12 PM

Why not just produce your hybrid connector and sell it to everyone needing a connector?

No, I meant an hybrid connector which is compatible with all years from '60 to '64.
There was small (and sometimes not so small) differences between each year during that period.
Top of the page Bottom of the page
christine-lover
Posted 2018-10-31 5:28 PM (#572703 - in reply to #572666)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 2996
2000500100100100100252525
Location: Sept. 1958
Chrome58 - 2018-10-31 5:33 AM

christine-lover - 2018-10-30 11:05 PM

Did you ever get enough orders together to do a run for the 60-64?

No, there was not enough interest, even though I advertised it across 2 forums.
Which is a shame, because I had designed an hybrid connector compatible with all years.
:o


That's what I had read but didn't know if it changed. Thanks.
Top of the page Bottom of the page
billy
Posted 2018-11-08 11:55 AM (#573173 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Extreme Veteran

Posts: 395
100100100252525
Location: upstate new york
Vincent,
Sent you a email today...
billy
Top of the page Bottom of the page
Chrome58
Posted 2018-11-10 2:15 AM (#573268 - in reply to #573173)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
billy - 2018-11-08 5:55 PM

Vincent,
Sent you a email today...
billy

Billy, I have replied.
Top of the page Bottom of the page
Chrome58
Posted 2018-11-12 2:00 PM (#573389 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello,

If you ever need a set, or just single ones, do not wait !

My current production batch is already 80% pre-sold, I have 4 sets left.
And I'm not sure when I'll do the next one ...
Top of the page Bottom of the page
Chrome58
Posted 2019-11-28 2:24 PM (#590876 - in reply to #573389)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello everyone,

It's time to see if I might launch a new batch in production.
So now is the time to let me know if you ever need a set, or even individual connectors

Thank you.

Edited by Chrome58 2019-11-28 2:25 PM
Top of the page Bottom of the page
shortmort
Posted 2019-11-28 2:33 PM (#590878 - in reply to #590876)
Subject: Re: '57-'59 Power Windows plastic connectors



Regular

Posts: 93
252525
Location: Upper Darby, PA
Vincent, mine worked perfectly! http://59plymouth.net/59forum/viewtopic.php?f=47&t=2722&start=840#p...

Thanks so much
Dan
Top of the page Bottom of the page
Chrome58
Posted 2019-12-03 3:00 AM (#591035 - in reply to #590878)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
shortmort - 2019-11-28 8:33 PM

Vincent, mine worked perfectly! http://59plymouth.net/59forum/viewtopic.php?f=47&t=2722&start=840#p...

Thanks so much
Dan

Thank you, Dan, for your feedback and the pictures
Top of the page Bottom of the page
Chrome58
Posted 2021-05-15 4:18 AM (#611996 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello everyone,

Just this message to tell you that I have launched a new batch in production.
So if you need a set of connectors, or single ones, sent me an e-mail at : powerwindows (at) orange (dot) fr

Thank you.



Edited by Chrome58 2021-05-15 4:20 AM
Top of the page Bottom of the page
Chrome58
Posted 2021-12-16 5:41 AM (#617705 - in reply to #611996)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
Hello everyone,

I have a few sets left from the previous batch.
So if you need a set of connectors, or single ones, sent me an e-mail at : powerwindows (at) orange (dot) fr

Thank you.

Top of the page Bottom of the page
Chrome58
Posted 2022-08-26 2:48 AM (#623811 - in reply to #523412)
Subject: Re: '57-'59 Power Windows plastic connectors



Expert

Posts: 1316
1000100100100
Location: Belgium, 40 miles south of Brussels
I have 1 set available from the last batch.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)