The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1957 Dodge Coronet Eyebrow trim caps
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
goodtoothdoc
Posted 2016-08-11 2:14 PM (#518858)
Subject: 1957 Dodge Coronet Eyebrow trim caps


Member

Posts: 24

I REMOVED MY CHROMED POT METAL END CAPS THAT COVER THE SEAM WHERE THE STAINLESS TRIM MEETS ONLY TO FIND THAT THERE ARE NO PART NUMBERS ON THE POT METAL CAPS.
I WAS TOLD THERE MIGHT BE A DIFFERENCE BETWEEN EARLY AND LATE 1957 CORONETS. I AM ALSO TOLD SOME WERE SIMPLE STAINLESS CAPS WHILE OTHES WERE LIKE MINE AND WERE CHROMED POT METAL. POTENTIAL PART NUMBERS THAT I HAVE FOUND ARE: 1686358 1686370 1754146 1754147. ANY THIUGHTS. THANK YOU, CLARK
Top of the page Bottom of the page
dougsoldcars
Posted 2016-09-29 6:31 PM (#522344 - in reply to #518858)
Subject: Re: 1957 Dodge Coronet Eyebrow trim caps


Regular

Posts: 98
252525
You didn't say why you needed to find the correct ones. If I were you, I would replete the ones that came on the car. In redoing my 56 Plymouth, I found NOS parts tended to be pitted and it was dollars ahead to have a good plater just replete my original parts.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)