|
|
Extreme Veteran
Posts: 303
Location: Harrisburg, Penna |
NEED CHOCK KIT FOR 2/4 BBLS------ FROM EXHAUST MANIFOLD TO BACK CARBURETOR. I HAVE THE FITTING IN THE EXHAUST MANIFOLD. ENGINE AND STOCK 58 CHRYSLER 300-D FACTORY SETUP. I THINK IT IS THE SAME FROM 55 TO 58 SINCE CARBS ARE WCFB TYPE.
ANY INFORMATION WILL HELP. THANKS
RON SWARTLEY
E MAIL ARCHANGEL1390@AOL.COM
PHONE 717-939-3429 |
|
|
|
Expert 5K+
Posts: 6498
Location: Newark, Texas (Fort Worth) | Choke kit? |
|
|
|
Extreme Veteran
Posts: 444
Location: North of the 49th | Hi
Have a look at this ....
http://www.ebay.com/itm/1956-61-CARTER-WCFB-CHOKE-ASSEMBLY-DUAL-QUA...
and these guys should have something....
http://www.carburetor-parts.com/WCFB_c_139.html
http://carbkitsource.com/
http://www.thecarburetorshop.com/CarterFourBarrelCarburetors.htm |
|
|
|
Expert
Posts: 3776
Location: NorCal |
I suspect the OP is looking for the sleeved heat tube that leads from the exhaust manifold to the choke housing. |
|
|
|
Location: Parts Unknown | I make my own chocks to match the originals. Basically a 4x4 cut at a 45ยบ angle
with beveled edges. As far as I know, these were not special to any type of carburation.
|
|
|
|
Expert
Posts: 3155
Location: NY & VT | LOL... I have an original chock left from my '58 Sweep, originals are the best for optimum performance and mpg! |
|
|