Viewing a thread - 904, valve body cracks

You are logged in as a guest. ( logon | register )

904, valve body cracks Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Transmission and Rear Axle	Message format

Posted 2016-04-14 12:43 PM (#509383)
Subject: 904, valve body cracks

Location: Finland

Is this 'cracks' normal for a 904 transmission?

Thanks

Edited by jjracing_ 2016-04-14 12:49 PM

(13022198_1108689775819823_2054164977_n.jpg)

(12992349_1108689755819825_391497028_n.jpg)

Attachments
----------------

Posted 2016-04-14 3:26 PM (#509393 - in reply to #509383)
Subject: RE: 904, valve body cracks

Expert

Posts: 3774
2000

Location: NorCal

Those aren't cracks, they're irregularities called "casting flash" (A thin section of metal formed at the mold).

Nothing to worry about.

Posted 2016-04-16 5:45 AM (#509536 - in reply to #509383)
Subject: Re: 904, valve body cracks

Location: Finland

Thanks for answer!
I found the real problem yesterday..

Edited by jjracing_ 2016-04-16 5:47 AM

(13010179_1174420405903835_9356631_o.jpg)

Attachments
----------------

Posted 2016-04-18 2:01 PM (#509668 - in reply to #509383)
Subject: Re: 904, valve body cracks

Elite Veteran

Posts: 907
500

Location: Magra, Sweden

Most probably your problems started with old hard rubber clutch seals causing the drive disc pack to slip.

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)