The Forward Look Network | ||
| ||
Parting out a 62 Newport 4dr Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
Baron007 |
| ||
Member Posts: 32 | Trying to reach some of the Nothern Europe Forward Look owners. Parts are advertised on the Dutch Mopar forum also. Saved from the crusher a rough 62 4dr Newport, original Belgian import car, lots of very nice outside chrome and nice/good/ fair interior pieces, very nice KM! domedash. Upper dash parts are good but lower ones are pitted, dashpad is sold, there were no outside mirrors, no hood, frame rails are bad, good front bumper, but no rear bumper. Inside bottom rotted away, but nice doors and good glass. Front seat is gone but I saved the ashtray, back seat is nice. No engine or trans but the rear end is there. It a 62 but lots of parts match a 60 or 61. I am in Belgium so beware of shipping costs. Edited by Baron007 2016-01-04 5:14 PM (P1012016.JPG) (P1012111.JPG) (P1012112.JPG) (P1012059.JPG) (P1012023.JPG) (P1012039.JPG) (P1012020.JPG) Attachments ---------------- P1012016.JPG (123KB - 307 downloads) P1012111.JPG (150KB - 199 downloads) P1012112.JPG (211KB - 216 downloads) P1012059.JPG (140KB - 208 downloads) P1012023.JPG (151KB - 214 downloads) P1012039.JPG (160KB - 208 downloads) P1012020.JPG (128KB - 214 downloads) | ||
Polara61_383 |
| ||
Veteran Posts: 158 Location: Ottawa, ON | Hey there, what about power window motors? | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | Looking at the parts, there are window winder handles, so I dont think it had electric windows If I had a car with an astrodome, I would be all over that one How rare is a kph one? Would love to find a 60 plymouth kph one for the dodge | ||
1960fury |
| ||
Expert 5K+ Posts: 7393 Location: northern germany | Polara61_383 - 2016-01-04 5:15 PM Hey there, what about power window motors? looks like window cranks to me | ||
Polara61_383 |
| ||
Veteran Posts: 158 Location: Ottawa, ON | Thanks Sid, yeah I probably should have looked closer ;-) | ||
Baron007 |
| ||
Member Posts: 32 | |||
Baron007 |
| ||
Member Posts: 32 | ttotired - 2016-01-04 6:37 PM Looking at the parts, there are window winder handles, so I dont think it had electric windows If I had a car with an astrodome, I would be all over that one How rare is a kph one? Would love to find a 60 plymouth kph one for the dodge It is rare, never seen one, I only know one 61 or 62 Chrysler here in Belgium, but I don't know it has the kmspeedo. I am thinking of buying a 60 2dr Dart, big project but very nice and nearly rustfree body, needs all machanical parts, but I shouldn't because I have to much projects right now, like my 62 Dart 2dr, 68 300 2dr, 69 Valiant 2dr. Edited by Baron007 2016-01-05 5:03 PM | ||
61 Polara GB |
| ||
Member Posts: 26 | I want the chrome piece surrounding the rear license plate please, is it dent free? i'm in UK and have sent you an email thanks Kevin | ||
Polara61_383 |
| ||
Veteran Posts: 158 Location: Ottawa, ON | Speaking of dent (and rust) free chrome: how is the molding aroung the rear window? mine is OK but a little dented... | ||
Baron007 |
| ||
Member Posts: 32 | Very nice, if you want some extra pics, pm me with your emailaddress, prefer to sell complete set, asking 175,- Edited by Baron007 2016-01-05 5:01 PM (P1012021.JPG) Attachments ---------------- P1012021.JPG (209KB - 199 downloads) | ||
Polara61_383 |
| ||
Veteran Posts: 158 Location: Ottawa, ON | pm sent | ||
Baron007 |
| ||
Member Posts: 32 | Nice hubcaps, 100,- euro set Sillplates: 60,- set Domelightwiring: 25,- Armrests: 30,- piece Front lower seat rim: 25,- piece Doorpanels: 25,- piece, 80,- set (1 chrome strip missing) Back seat: 125,- Backwindow: 200- Frontwindow and trim not for sale at this moment! Edited by Baron007 2016-01-06 7:55 AM (P1012028.JPG) (P1012029.JPG) (P1012048.JPG) (P1012044.JPG) (P1012040.JPG) (P1012033.JPG) Attachments ---------------- P1012028.JPG (167KB - 191 downloads) P1012029.JPG (145KB - 190 downloads) P1012048.JPG (246KB - 197 downloads) P1012044.JPG (143KB - 178 downloads) P1012040.JPG (150KB - 176 downloads) P1012033.JPG (136KB - 182 downloads) | ||
196061SAVOY |
| ||
User has resigned from board | <p>now that's how u break down a car and advertise the parts and pieces, excellent job!!! </p> Edited by 196061SAVOY 2016-01-06 6:54 PM | ||
Baron007 |
| ||
Member Posts: 32 | Thanks! It is my 7th Mopar that I depart, but this the oldest one. Hope prices are reasonable, otherwise make a fair offer. And surely not to be saved because car almost broke in half when I tried to load it off from my brandnew trailer. a convertible wouldn't have made it. More: under and upper dash parts 2 plastic vents: 20,- a piece Steeringcolumn brace: 20,- Dash bracket: 5,- upperdash half moon: 75,- with rings Upper dash vent: 25,- Speeker frame (small broken piece): 10,-? Hoses: 10,- glove box: 5,- fusebox, has rust: 10,- broken dash mirror, pitted: 10,- Front bumper needs rechrome for showcar, but good for daily with bracket because I can't get them off 195,- Free stuff: parts of front seat (silver)and headliner if you want to repair yours. (P1012060.JPG) (P1012158.JPG) (P1012157.JPG) (P1012161.JPG) (P1012163.JPG) Attachments ---------------- P1012060.JPG (145KB - 192 downloads) P1012158.JPG (125KB - 193 downloads) P1012157.JPG (134KB - 195 downloads) P1012161.JPG (109KB - 189 downloads) P1012163.JPG (113KB - 200 downloads) | ||
196061SAVOY |
| ||
User has resigned from board | u have a picture of your 62 dart 330, I love those cars | ||
Baron007 |
| ||
Member Posts: 32 | NOT FOR SALE! Original 6cyl, 3sp manual, but I got a complete bigblock K-frame setup with Wilwood diskbrakes etc with the car to make that Max Wedge clone. Missing front turn signal lenses and I need 1 red taillight lense. So if anybody has them we can make a deal on the 62 Chrysler parts. Edited by Baron007 2016-01-07 6:56 AM (resP4221722.JPG) (resP9201276.JPG) (resP1021456.JPG) (resP9201259.JPG) Attachments ---------------- resP4221722.JPG (44KB - 205 downloads) resP9201276.JPG (51KB - 191 downloads) resP1021456.JPG (41KB - 185 downloads) resP9201259.JPG (29KB - 206 downloads) | ||
196061SAVOY |
| ||
User has resigned from board | <p>the max clone cars are nice but over priced, and are just clones, not the real deal, most are half assed , except the ones built by bob mosher , those are the "ACE OF SPADES", I prefer stock, orig, id love to find a southern cal, plain jane ,old lady, stock 62 dodge/plymouth with a slant 6, I don't need Viagra under my hood , the slant 6 never fails me, good lookin car THO!</p> Edited by 196061SAVOY 2016-01-08 6:29 PM (more-outside-snapshots-01.jpg) (headers-02.jpg) Attachments ---------------- more-outside-snapshots-01.jpg (41KB - 183 downloads) headers-02.jpg (52KB - 188 downloads) | ||
Baron007 |
| ||
Member Posts: 32 | Just found an Imperial '64 413 and trans for cheap, gonna build my own. Love the black ones with the red interior, just perfect color combo! Sill plates, licenseplate chrome, front lower fender ornaments are sold. More: Pic1: leafsprings, 1 has 2 broken springs: 60,- set Steeringbox + linkage: 100,- Under radiator protection: 25,- A-styles nice: 30,- for 1 B-styles, complete: 50,- for 1 Torsion bars: 75,- set Pic2: Backside: make your own sofa of trailer, if it doesn't sell anyone has a link how to make them? 250,- Pic3: Trans crossmember, has bad edges, 50,-? Swaybar: 75,- Trunklid springs: 50,- set Rockers, undersides are bad, maybe you just a few inches from the upside Pic4: Lower control arms 50,- for 1 Upper: 50- for 1 or make me a good offer for the complete setup, some holes in underside of beams Pic5: backwindow, very nice: 200,- Pic6: Trunklid, underside edge is rusted through,75,- Pic7; Complete doors, nice have been stored inside, including window, 175,- for 1 front, 125,- for 1 back, some surface rust. Pic8: front fenders, have rust in front and lower edge: offer? Pic9: tunnel: offer? Not in pictures: roof: 175,- OBO! Edited by Baron007 2016-01-11 4:40 PM (P1012177res.JPG) (P1012179res.JPG) (P1012185res.JPG) (P1012190res.JPG) (P1012191res.JPG) (P1012192res.JPG) (P1012195res.JPG) (P1012197res.JPG) (P1012200res.JPG) Attachments ---------------- P1012177res.JPG (44KB - 207 downloads) P1012179res.JPG (71KB - 177 downloads) P1012185res.JPG (62KB - 186 downloads) P1012190res.JPG (65KB - 179 downloads) P1012191res.JPG (54KB - 189 downloads) P1012192res.JPG (45KB - 179 downloads) P1012195res.JPG (63KB - 173 downloads) P1012197res.JPG (59KB - 191 downloads) P1012200res.JPG (69KB - 189 downloads) | ||
Baron007 |
| ||
Member Posts: 32 | Back window trim is sold, rearside splash guards are on hold, 1 wheel is sold. | ||
BigBlockMopar |
| ||
Expert Posts: 3575 Location: Netherlands | Too bad you took just about everything apart on the dash already. Although I'm not actively searching but I might have been interested in the full dashboard from a '60-'62 Chrysler. | ||
matador440 |
| ||
Elite Veteran Posts: 690 Location: BELTSVILLE, MARYLAND 20705 | I HAVE BOTH 61 AND 62 DASH BOARD ASSEMBLIES OUT OF CARS READY TO GO COMPLETE... | ||
Baron007 |
| ||
Member Posts: 32 | BigBlockMopar - 2016-01-29 7:26 AM Too bad you took just about everything apart on the dash already. Although I'm not actively searching but I might have been interested in the full dashboard from a '60-'62 Chrysler. Sorry, next time I'll contact you. More: 1° outer vent: 30,-; inner trim most look rusty, so needs sanding and paint: make me an offer! 2° inner door trims with usable catwishes: 20,- for 1; parkbrake assembly: 30,- 3° jack stuff: 50,- for setup, hood lock: 25,-; splash shield: 25,-; 1 hood hinge 30,- 4° brake pedal: 40,- ; horns: 50,-; booster needs rebuild I guess : 50,-; master cil:25,-; carb brackets: 25,- ; 2 unknown shields: 25,- (P1012261RES.JPG) (P1012262RES.JPG) (P1012263RES.JPG) (P1012264RES.JPG) Attachments ---------------- P1012261RES.JPG (69KB - 235 downloads) P1012262RES.JPG (86KB - 235 downloads) P1012263RES.JPG (56KB - 187 downloads) P1012264RES.JPG (62KB - 199 downloads) | ||
Polara61_383 |
| ||
Veteran Posts: 158 Location: Ottawa, ON | If I see that correctly, the unknown shields are the heat shields for the engine mounts. | ||
Baron007 |
| ||
Member Posts: 32 | Yes, they had to be near engine, because lots of grease on these, so 100% rustfree! Last bits: BB trans inspectioncover: 15,- 1 under dash supportbracket:5,- 2 front doorhinges L+R: 50,- set Firewall stuff: plate: 10,-, bracket: 5,-, support brackets: 25,- set Fresh air vent: 30,- plastic/rubber in very condition, surrounding metal, rusted, it took 1 hour and half a bottle of WD40 but mechanism works fine. OBO! Edited by Baron007 2016-02-07 4:06 PM (P1012269res.JPG) (P1012271res.JPG) Attachments ---------------- P1012269res.JPG (73KB - 191 downloads) P1012271res.JPG (90KB - 183 downloads) | ||
Chrysleri |
| ||
Regular Posts: 62 Location: Nokia, Finland | Do you still have astrodome? Price? | ||
Baron007 |
| ||
Member Posts: 32 | Back window trim is sold. Pm @ Chrysleri | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |