Viewing a thread - finned aluminum valve covers

You are logged in as a guest. ( logon | register )

finned aluminum valve covers Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> The Exhaust Pipe - Modification & Performance	Message format

1961 fury

Posted 2015-08-11 12:23 AM (#486756)
Subject: finned aluminum valve covers

Veteran

Posts: 116
100

Anybody have a set of finned aluminum valve covers for a 361 the 4 bolt style or is any company making them , thanks jeff

57chizler

Posted 2015-08-11 1:04 PM (#486802 - in reply to #486756)
Subject: RE: finned aluminum valve covers

Expert

Posts: 3775
2000

Location: NorCal

Check on E-bay, they show up there from time to time. If you're not finicky, the 6-bolt covers will work...just leave the bottom holes empty or trim off the bottom corners.

Rodger

Posted 2015-08-11 2:02 PM (#486810 - in reply to #486756)
Subject: Re: finned aluminum valve covers

Expert

Posts: 1506
1000

Location: Colo Spgs

Hola Jeff

They are the same part number for any 1958 to The Early Series 1963 --- 350/ 361/ 383 or 413.

If you happen on to a set of The Newer Ones ---- do as instructed.

Rodger & Gabby
COS

61imp

Posted 2015-10-16 11:58 AM (#492399 - in reply to #486756)
Subject: RE: finned aluminum valve covers

Regular

Posts: 90

Location: Oklahoma

Offy is still making theirs, they are pricey, but I had to have a set

http://www.summitracing.com/parts/ofy-5498