|
|
Veteran
Posts: 110
Location: Falcon, CO | I am having my 1957 Dodge 325 Poly Engine rebuilt and am wondering about engine rebuild kits. I have seen several sources (such as Kanter and hothemiheads) but am not sure of the quality. I'm sure there are probably other sources that I am not aware of. Any direction and/or assistance would be greatly appreciated! Don |
|
|
|
Expert
Posts: 3393
Location: Chestertown, NY ( near Lake George) | Look at Egge also. |
|
|
|
Veteran
Posts: 194
Location: Dorset, England | I used all 3 of those mentioned for my 325 poly. Had the most personal service from Hotheads. Pistons from Egge weren't as nice as the OEMs in my opinion.
Gasket set from Rockauto.
Edited by flattie45 2014-11-23 5:10 AM
|
|
|
|
Expert
Posts: 3027
Location: N.W. Fla. | Most parts are the same as the 325 hemi. Besides Hot Heads, Quality Engineered Components (Wayfarer here on this Board) has parts as does a place in Jacksonville (use 325 or Dodge hemi for ebay search) that posts on EBay. |
|
|