|
|
Expert
Posts: 1493
Location: New Castle PA | I'm not having good luck with the search engine. If someone can help, I'd appreciate it. I recall someone (possibly one of our Australian friends) very meticulously machining the retainer for a Benrus DeSotomatic clock for his car, I believe a 1957 DeSoto. I'm trying to locate that thread. It showed schematics and measurements and was quite detailed.
Thanks for any help that is offered!
|
|
|
|
Expert
Posts: 1493
Location: New Castle PA | I did find this page, which MAY be what I'm remembering. http://forwardlook.net/forums/forums/thread-view.asp?tid=39513&star... Seems to me there were more details of the retainer, though. |
|
|
|
Location: The Mile High City | Hi, Ed: I think that was Bob Hamilton. I haven't done the search for the thread, but I copied and attached his drawings.
(bob 01.jpg)
(bob 02.jpg)
(bob 04.jpg)
(bob 05.jpg)
(bob 06.jpg)
(bob 07.jpg)
(bob 08.jpg)
(bob 09.jpg)
(bob 10.jpg)
(bob 11.jpg)
(bob 12.jpg)
(bob 13.jpg)
Attachments ---------------- bob 01.jpg (175KB - 135 downloads) bob 02.jpg (188KB - 133 downloads) bob 04.jpg (165KB - 127 downloads) bob 05.jpg (170KB - 140 downloads) bob 06.jpg (160KB - 142 downloads) bob 07.jpg (135KB - 122 downloads) bob 08.jpg (165KB - 131 downloads) bob 09.jpg (189KB - 136 downloads) bob 10.jpg (155KB - 131 downloads) bob 11.jpg (156KB - 143 downloads) bob 12.jpg (76KB - 137 downloads) bob 13.jpg (96KB - 144 downloads)
|
|
|
|
Expert
Posts: 1493
Location: New Castle PA | Yup! That is it! Thank you very much! |
|
|
|
Location: The Mile High City | Ed, are you thinking of having one of these milled? |
|
|
|
Expert
Posts: 1493
Location: New Castle PA | Not me, but I have a guy in the UK who needs one, and has machinist training/experience. I may suggest that if they aren't already available as repros (I know Bo Malefors' shop had planned to make them), perhaps this fellow can make them. Certainly he'd make one for himself, and then have to decide if the trouble and expense of making them so they are affordable is something that's do-able. |
|
|
|
Location: The Mile High City | Unfortunately, I think there are a couple of critical dimensions missing from Bob Hamilton's wonderful work - however, I think all the missing information can be answered with the horn ring and the watch casing. I have thought about trying to have Bob's work reproduced, but I know it will be pretty expensive and I haven't taken the leap yet. Most of the milling shops I inquired with use CAD drawings and making those can be a big expense in addition to the mill work. |
|
|