The Forward Look Network | ||
| ||
Grease caps Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Brakes, Wheels and Tires | Message format |
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | Hi all. When I restored my 57 Fury I installed new grease caps on the front brake drums. Recently I found that I was constantly needing to tighten up the wheel bearing/it was always coming loose. Upon inspection I found that the wheel bearing and associated grease seemed to have a lot of metal filings in it, obviously wearing away at the bearing. Upon inspection of the grease cap I could see where it was coming from. The inside of the grease cap showed evidence of rotary wear on the inside end of the cap, where the end of the stub axle had been grinding the inside of the grease cap as the drum goes round, obviously the wrong size grease cap/too short. Does anybody have a supplier for the longer correct size grease caps to suit 57 Plymouth? Glenn. | ||
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | That sounds awesome Richard, I only need 2. Can you give me the measurements to be sure that they will work? O/D of the round part that slips inside the drum, and depth from the base of the collar to the end, internal. Cheers! Glenn. rbmain - 2013-08-19 3:10 PM I bought a bag of caps on eBay a long time ago that work good on my 56 Plymouths. They look to be OEM. You can have a pair for the cost of shipping to NZ. | ||
rbmain |
| ||
Looking a Gift Horse in the mouth? | |||
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | No it's just that I am unsure if 56 Plymouth is the same grease cap as 57 Plymouth. 57 was a big model year change. Never mind, let me know what the postage will be. Can I pay you with Paypal? Don't forget to add a little on for the Paypal commission charge. I don't want you to be out of pocket. Cheers, Glenn. | ||
MOPAR-TO-YA |
| ||
Expert 5K+ Posts: 5139 Location: cornpatch county, Southwest IOA | rbmain - 2013-08-19 1:43 AM You know how much time can be wasted by not getting parts that will fit? Especially oversea's. Time that could be spent looking eleswhere. When I go to a parts place several miles from home, I sometimes make the sales person upset because I take the part out of the box and inspect it before paying. MANY times I have been glad to have that habit. ....................................MOLooking a Gift Horse in the mouth? | ||
rbmain |
| ||
OK, when I open up a Parts Place and sell grease caps for money, I won't be surprised by ingratitude. Anyway, offer withdrawn. | |||
60 dart |
| ||
Expert 5K+ Posts: 8947 Location: WHEELING,WV.>>>HOME OF WWVA | MOPAR-TO-YA - 2013-08-19 3:25 PM rbmain - 2013-08-19 1:43 AM You know how much time can be wasted by not getting parts that will fit? Especially oversea's. Time that could be spent looking eleswhere. When I go to a parts place several miles from home, I sometimes make the sales person upset because I take the part out of the box and inspect it before paying. MANY times I have been glad to have that habit. ....................................MOLooking a Gift Horse in the mouth? i piss em off by askin 3-4 times if they are sure it's correct . then i tell em i'm really gettin tired of gettin the wrong parts time after time . the looks i get in return are priceless but like i really care what they think . it's my cash they're gettin --------------------------later | ||
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | Hi Richard. I certainly did not mean to offend, and I could really use those grease caps, if you would reconsider. Glenn. No it's just that I am unsure if 56 Plymouth is the same grease cap as 57 Plymouth. 57 was a big model year change. Never mind, let me know what the postage will be. Can I pay you with Paypal? Don't forget to add a little on for the Paypal commission charge. I don't want you to be out of pocket. Cheers, | ||
MOPAR-TO-YA |
| ||
Expert 5K+ Posts: 5139 Location: cornpatch county, Southwest IOA | rbmain - 2013-08-19 3:10 PM This is odd. It shows up as a quote in Fury's post, but does not show up on my PC as a post. Guess the gift horse comment isn't quite so rude after all. .........................MOI bought a bag of caps on eBay a long time ago that work good on my 56 Plymouths. They look to be OEM. You can have a pair for the cost of shipping to NZ. | ||
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | MO. Yes I thought that strange too. I can only guess that Richard deleted his post because he retracted his offer. For the life of me I cannot see what I said to offend him, I just want to save everyone the hassle of shipping incorrect parts internationally, after all, it is the fact that I have incorrect parts now that is my reason for wanting to find the correct parts, and I wouldn't have a clue if 56 and 57 Plymouth grease caps are the same or not, I don't know anybody around here who has a 56 Plymouth I can look at.. These incorrect parts, if installed and left uninspected as they grind away at the bearings, could eventually cause a complete failure of the wheel bearings and subsequent possible carnage. I guess I'm still looking... Glenn. MOPAR-TO-YA - 2013-08-20 5:33 PM This is odd. It shows up as a quote in Fury's post, but does not show up on my PC as a post. Guess the gift horse comment isn't quite so rude after all. .........................MOrbmain - 2013-08-19 3:10 PM I bought a bag of caps on eBay a long time ago that work good on my 56 Plymouths. They look to be OEM. You can have a pair for the cost of shipping to NZ. | ||
MOPAR-TO-YA |
| ||
Expert 5K+ Posts: 5139 Location: cornpatch county, Southwest IOA | FURY - 2013-08-20 9:39 PM MO. Yes I thought that strange too. I can only guess that Richard deleted his post because he retracted his offer. For the life of me I cannot see what I said to offend him, I just want to save everyone the hassle of shipping incorrect parts internationally, after all, it is the fact that I have incorrect parts now that is my reason for wanting to find the correct parts, and I wouldn't have a clue if 56 and 57 Plymouth grease caps are the same or not, I don't know anybody around here who has a 56 Plymouth I can look at.. These incorrect parts, if installed and left uninspected as they grind away at the bearings, could eventually cause a complete failure of the wheel bearings and subsequent possible carnage. I guess I'm still looking... Glenn. Glenn, yes I understood completely your situation. Sorry to have made one of your sources to take offense. Hope you soon find the bearing caps you need................MO MOPAR-TO-YA - 2013-08-20 5:33 PM This is odd. It shows up as a quote in Fury's post, but does not show up on my PC as a post. Guess the gift horse comment isn't quite so rude after all. .........................MOrbmain - 2013-08-19 3:10 PM I bought a bag of caps on eBay a long time ago that work good on my 56 Plymouths. They look to be OEM. You can have a pair for the cost of shipping to NZ. | ||
58coupe |
| ||
Expert Posts: 1739 Location: Alaska | I am sure I have 2 57 caps but they are going to be "well used". I will look tonight. | ||
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | Well if nothing else it would be good to know what size caps I am supposed to have. Thanks, Glenn. | ||
FURY |
| ||
Elite Veteran Posts: 1044 Location: Auckland, New Zealand. | Big thanks to Rolland for sorting me out with a couple of grease caps. Pictures attached of one of the nice newish correct ones from Rolland, a rusty correct one from a local parts car, and the shorter after market cap I had on the car. Looking at the correct caps against the caps I had on the car it is little wonder they were being scored by the end of the stub axle and falling off into the wheelcover-the correct ones are much taller. I can't remember where I got these incorrect caps from, maybe Ebay, but something to look out for. Glenn. 58coupe - 2013-08-22 3:19 AM I am sure I have 2 57 caps but they are going to be "well used". I will look tonight. Edited by FURY 2013-09-06 1:26 AM (Grease caps-correct and wrong1-15%.jpg) (Grease caps-correct and wrong2-15%.jpg) Attachments ---------------- Grease caps-correct and wrong1-15%.jpg (110KB - 232 downloads) Grease caps-correct and wrong2-15%.jpg (136KB - 234 downloads) | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | Dredging up this old thread after a search. I discovered the other day that Dorman makes new dust/grease caps. However, I just don't know what size my 56 Dodge would need. https://www.dormanproducts.com/c-771-wheel-hub-dust-caps.aspx Perhaps this 1 and 13/16" 13996? Dust Cap 1-13/16 Dia. | 13996 | 3/4 Top OR ??? Edited by 56D500boy 2018-10-06 2:10 AM | ||
Stroller |
| ||
Extreme Veteran Posts: 371 | Ok this is an older thread I see. A micrometer would solve your problem. I am wondering how on earth the hub can be coming loose. Does your car have tappered cups and cones or the roller balls? If the worng seal is used then it can cause the hub to sit out where it should not be not allowing proper seating on the spindle. It does have the washer, crown washer w/cotter pin and finaly nut does it not or is something missing? Also if not properly seated at install the hub may be a "false" seating. The dust cap fits inside the hub and it's closest friend is the race, which should never turn and not the bearing housing. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |