|
|
Member
Posts: 42
| I'm looking for a good driver-quality or better fender mounted mirror. If you have a good pair I'm in the market to buy, but I can do with just one. I currently have one on the left as noted in this picture so I would like a mate for the right side.
(58PLYmirrors.jpg)
Attachments ---------------- 58PLYmirrors.jpg (118KB - 86 downloads)
|
|
|
|
Expert
Posts: 4110
Location: Connecticut | Kirk -
Those mirrors in the photo appear to be aftermarket. Is that what you are looking for, or do you want factory-correct ?
Ron |
|
|
|
Member
Posts: 42
| ronbo97 - 2012-07-12 12:08 PM
Kirk -
Those mirrors in the photo appear to be aftermarket. Is that what you are looking for, or do you want factory-correct ?
Ron
Hey Ron,
I'd love "correct", but my current left hand mirror is like the ones shown. Do the correct ones have the same spacing to mount? I was looking at some other mirrors and the base was shorter than my existing ones, so I didn't want ugly holes showing! Do you have a picture of the correct mirrors and perhaps a measurement of how they attach to the fender? If I can go correct and cover the existing I'd prefer the correct ones, and would then need a pair. Do you have a correct pair you would sell?
Thanks!
Kirk |
|
|
|
Expert
Posts: 4110
Location: Connecticut | There are two factory mirrors available for your car: a single strut and a dual strut. I don't have the hole measurements for the single strut, but the dual strut holes are about 2 1/2 inches apart. None for sale right now.
Ron
|
|
|
|
Member
Posts: 42
| ronbo97 - 2012-07-12 8:19 PM
There are two factory mirrors available for your car: a single strut and a dual strut. I don't have the hole measurements for the single strut, but the dual strut holes are about 2 1/2 inches apart. None for sale right now.
Ron
Thanks Ron! Do you by chance have pictures of those original mirrors? |
|
|
|
Expert 5K+
Posts: 7210
Location: Victoria, BC, on Vancouver Island, Canada | I have a used right hand side dual strut one available. |
|
|
|
Member
Posts: 42
| imopar380 - 2012-07-14 3:54 PM
I have a used right hand side dual strut one available.
Ian, can you tell me the measurement of the mounting screws? I'm hoping that they are close to what I have with this non-stock mirror, and eventually replace with stock mirrors. Seems to be hard to find!! Thanks, Kirk |
|
|
|
Member
Posts: 42
| From what I am hearing this is not an stock mirror. Anybody have one of these to sell? |
|
|