The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

door handles don't open door properly 1959 dodge
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
dodge59
Posted 2019-11-15 8:01 PM (#590179)
Subject: door handles don't open door properly 1959 dodge



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin

4 door 1959 dodge  door handles seem to release on the first  catch/ striker and then won't  open the door completely . I can open from the inside fine  but  not on the outside.  what needs to be adjusted ? or are the latches just worn out?

Top of the page Bottom of the page
ronbo97
Posted 2019-11-15 10:46 PM (#590186 - in reply to #590179)
Subject: RE: door handles don't open door properly 1959 dodge


Expert

Posts: 4036
2000200025
Location: Connecticut

On the door handle, there is a racheted extension on the inside of the door that mates to another racheted piece that is attached to the door lock mechanism. They are held together by a small hex head bolt. You access these via a rubber plug on the inside of the door near where the latch is. These are mis-adjusted. Loosen bolt, readjust to remove the play. Retighten, then test out.

Ron

Top of the page Bottom of the page
dodge59
Posted 2019-11-15 11:27 PM (#590187 - in reply to #590179)
Subject: Re: door handles don't open door properly 1959 dodge



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin
Thanks Ron . I already checked into that adjustment with success. from what I can see........... it's in the latch mechanism where that movement from the door handle upward movement moves the mechanism where there is a pin and slotted rod on the insideof latch ........... the slotted rod on the latch moves a large pin , that movement is worn and elongated . If I move that pin just a little farther the door will open . either I need a new latch or weld the slot shut about a 1/8" . It just doesn't have enough movement to move that arm/ pin . also ........ I did the adjust that rod you suggested in the inner part of door thru that plug hole Ron. it's adjusted all the way .
Top of the page Bottom of the page
dodge59
Posted 2019-11-16 10:17 AM (#590198 - in reply to #590179)
Subject: Re: door handles don't open door properly 1959 dodge



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin
here is a pic of a latch not not mine .
Top of the page Bottom of the page
dodge59
Posted 2019-11-16 10:17 AM (#590199 - in reply to #590179)
Subject: Re: door handles don't open door properly 1959 dodge



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin
here is a pic of a latch not not mine .



(s-l1600 (6).jpg)



Attachments
----------------
Attachments s-l1600 (6).jpg (79KB - 122 downloads)
Top of the page Bottom of the page
lozrox58
Posted 2019-11-17 4:21 AM (#590266 - in reply to #590179)
Subject: RE: door handles don't open door properly 1959 dodge



Extreme Veteran

Posts: 306
100100100
Location: Newcastle Australia
Typically on the rear door handles it's the outside handle that fails.
There is a small S shaped link on the outside handle. This link collapses with use.
This link was out of shape on all of my rear handles. I managed to pick up a NOS handle and made up a replacement for the other side.

Edited by lozrox58 2019-11-17 4:26 AM




(Rear Door Handle FL1.jpg)



(Rear Door Handle FL2.JPG)



(Rear Door Handle FL3.JPG)



(Rear Door Handle FL4.JPG)



(Rear Door Handle FL5.JPG)



Attachments
----------------
Attachments Rear Door Handle FL1.jpg (223KB - 139 downloads)
Attachments Rear Door Handle FL2.JPG (240KB - 131 downloads)
Attachments Rear Door Handle FL3.JPG (238KB - 132 downloads)
Attachments Rear Door Handle FL4.JPG (203KB - 119 downloads)
Attachments Rear Door Handle FL5.JPG (220KB - 107 downloads)
Top of the page Bottom of the page
57burb
Posted 2019-11-18 5:25 PM (#590348 - in reply to #590266)
Subject: RE: door handles don't open door properly 1959 dodge



Expert

Posts: 3967
200010005001001001001002525
Location: DFW, TX
I've found many times that the issue is corrosion and gunk caught up in the handle mechanism itself. Even though you can freely move the handle, the internal components are not moving.

Usually spraying some penetrant and working the mechanism will free it up. I'd at least give that a try before taking it apart.
Top of the page Bottom of the page
dodge59
Posted 2019-11-18 6:29 PM (#590351 - in reply to #590179)
Subject: Re: door handles don't open door properly 1959 dodge



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin
I sprayed several times with lubricant . , I'll try washing it off and start over again. worth a try.
Top of the page Bottom of the page
ronbo97
Posted 2019-11-18 10:38 PM (#590375 - in reply to #590351)
Subject: Re: door handles don't open door properly 1959 dodge


Expert

Posts: 4036
2000200025
Location: Connecticut

dodge59 - 2019-11-18 6:29 PM I sprayed several times with lubricant . , I'll try washing it off and start over again. worth a try.

If the pin is loose, no amount of spraying will solve the problem. You've already determined that it is the pin. So you need to remove the latch, then replace it. All 59 Mopars use the same latch. So shouldn't be that difficult to find.

Ron

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)