The Forward Look Network | ||
| ||
Upper control arm bushes 57-58 large car Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Steering and Suspension | Message format |
ram300 |
| ||
Extreme Veteran Posts: 363 | Anybody have a supplier for these or crossover reference that doesn't want the gold out of ya teeth in return? Thanks | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | ram300 - 2021-02-23 5:18 PM Anybody have a supplier for these or crossover reference that doesn't want the gold out of ya teeth in return? Thanks You might have to put up your gold teeth, *IF* you can find what you need. I think the upper control arm bushings would be 1881646 and the lower control arm bushing would be 1881647, (with the combined upper and lower set as 1881648, according to this pdf: http://www.chrysler300club.com/tech/torsion-bar.pdf Hiltop had some 1881646 uppers but they are out of stock: https://www.hiltopautoparts.com/product/nos-mopar-upper-control-arm-... GreaseMonkey Garage http://www.greasemonkeyranch.com/ seems to have the 1881647 for decent money: https://lookup.greasemonkeyranch.com/parts?part_numbers-1=1881646&pa... Len Dawson doesn't have any of those. Kanter has complete kits for really decent money (in my opinion): https://www.kanter.com/productdetail.aspx?DeptNo=1600&MakeName=Chrys... | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | I detail some parts here... http://www.forwardlook.net/forums/forums/thread-view.asp?tid=65559&... | ||
Powerflite |
| ||
Expert 5K+ Posts: 9605 Location: So. Cal | Finding these parts is a pain in the neck because no one seems to understand compatibility. '57-'58 Dodge/Plymouth parts aren't the same. '59 Chrysler parts aren't the same. '58 Chrysler Windsor parts aren't the same. Yet, you often see a large '57-'75 compatibility listed by vendors. So Mike, your parts list doesn't help him as you have a Dodge. And Dave, your Kanter link is for the '58 Windsor, which isn't the same. Nevertheless, Kanter does seem to have proper rebuild kits for the large cars, and they seem to have just the upper control arm bushings for $92/set as well. https://www.kanter.com/productdetail.aspx?DeptNo=1600&MakeName=Chrys... When I last purchased them, I bought them cheap off E-bay, but I don't see any there now. The Mobile Parts guy that visits this forum can likely help you out as well. | ||
mobileparts |
| ||
Veteran Posts: 253 | Thanks for the shout out, Powerflite. & Correct, they are 1957 - 1958 Chrysler & DeSoto ONLY -- and NOT the Windsor & Fireflites, built on the smaller chassis, which use the 1957 - 1958 Dodge & Plymouth -- which is also, it's own entity. They are both "peanut bushings" -- the smallest bushings EVER (smaller than all Ramblers even !!!! --- what were they thinking????) I continue to try to keep both of them in stock, NEW U.S.A. made --- and, at this moment in time, I have both of them..... Always best to simply call me --- Craig --- 516 - 485 - 1935.....New York... Edited by mobileparts 2021-02-25 2:39 PM | ||
ram300 |
| ||
Extreme Veteran Posts: 363 | Could you PM me with a price list and availability of your steering/suspension parts to suit the large cars. Thanks Owen | ||
Stroller |
| ||
Extreme Veteran Posts: 371 | Moog Mater catalog. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |