The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

rear power window regulator pn 1770030
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
tailfins
Posted 2018-01-13 7:40 PM (#556169)
Subject: rear power window regulator pn 1770030


Expert

Posts: 1776
1000500100100252525
Location: calif
can someone identify if this is correct for 57 dodge 2 door hardtop?
if not, then what the correct pn would be?
thanks
Top of the page Bottom of the page
miquelonbrad
Posted 2018-01-13 10:18 PM (#556178 - in reply to #556169)
Subject: Re: rear power window regulator pn 1770030



Expert

Posts: 1737
100050010010025
Location: Hay Lakes, Alberta, Canada
Well, the 1957 Chrysler Corporation of Canada Limited Passenger Car Parts manual says that the rear "Window Lift Arms, Sector, And Mounting Plate Assembly" parts numbers are:
-Right 1770 024
-Left 1770 025

I don't see that part number for any of the 57 or 58 regulators, but the number is right in the middle of numbers that are used for regulators. Is it a complete unit, with motor attached? The parts book breaks down each part and doesn't offer a number for a complete assembly.
Top of the page Bottom of the page
LD3 Greg
Posted 2018-01-13 10:53 PM (#556183 - in reply to #556178)
Subject: Re: rear power window regulator pn 1770030


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada
Just remember that the Dodge/Plymouth 2 Dr. HT rear regulator doesn't interchange with Convertibles or Anything else! Manual or power.

Greg
Top of the page Bottom of the page
LD3 Greg
Posted 2018-01-13 11:19 PM (#556186 - in reply to #556183)
Subject: Re: rear power window regulator pn 1770030


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada
Back in the day when these parts cars were plentiful and cheap, I never found a 57/58 D/P, 2 Dr. HT with power windows. But, I managed to make rear regulators from a 4 Dr. HT..using the manual tracks .It required some machining, cutting and welding and I might have a series of pics if you want. As I recall it required some changes to the inner quarter panel as well but it wasn't a big deal.

Greg
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)