1959 Chrysler Windsor speedometer pinion
Nick Nichols
Posted
2024-03-13 5:47 PM (#634189)
Subject:
1959 Chrysler Windsor speedometer pinion
Veteran
Posts: 214
Looking for a 17 tooth speedometer pinion for a 59 Chrysler Windsor, Part # 1636406
Thank you. Nick
56D500boy
Posted
2024-03-13 11:36 PM (#634193 - in reply to #634189)
Subject:
RE: 1959 Chrysler Windsor speedometer pinion
Expert 5K+
Posts: 9915
Location: Lower Mainland BC
.
I have an 18 tooth going spare if that helps. I needed a 20 tooth gear and I was able to find one at Fatsco for reasonable money.
https://www.fatsco.net/
The 1636406 17 tooth is red
(apparently
).
REFERENCE:
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=78789&...
Edited by 56D500boy 2024-03-14 2:03 AM
(17Tooth1623406SpeedometerPinionGear.jpg)
Attachments
----------------
17Tooth1623406SpeedometerPinionGear.jpg
(327KB - 20 downloads)
Nick Nichols
Posted
2024-03-14 11:05 AM (#634197 - in reply to #634189)
Subject:
Re: 1959 Chrysler Windsor speedometer pinion
Veteran
Posts: 214
I checked with Fatsco, no luck. Thank you.
mstrug
Posted
2024-03-14 2:19 PM (#634198 - in reply to #634189)
Subject:
Re: 1959 Chrysler Windsor speedometer pinion
Expert 5K+
Posts: 6504
Location: Newark, Texas (Fort Worth)
hmmm
https://gmclassics.com/part/small-speedometer-driven-gear-34-17-teet...
3/4'' diameter
(17 tooth gm gear 1.jpg)
Attachments
----------------
17 tooth gm gear 1.jpg
(38KB - 16 downloads)
56D500boy
Posted
2024-03-14 3:18 PM (#634201 - in reply to #634198)
Subject:
Re: 1959 Chrysler Windsor speedometer pinion
Expert 5K+
Posts: 9915
Location: Lower Mainland BC
mstrug - 2024-03-14 11:19 AM
hmmm
https://gmclassics.com/part/small-speedometer-driven-gear-34-17-teet...
3/4'' diameter
"Fits: Chevrolet Nova 1962-1979"
mstrug
Posted
2024-03-14 5:30 PM (#634204 - in reply to #634189)
Subject:
Re: 1959 Chrysler Windsor speedometer pinion
Expert 5K+
Posts: 6504
Location: Newark, Texas (Fort Worth)
Look at it. Might just work. Machine off the nub, but I don't have dimensions. It's $10.00!
Edited by mstrug 2024-03-14 5:32 PM
56D500boy
Posted
2024-03-14 11:33 PM (#634215 - in reply to #634204)
Subject:
Re: 1959 Chrysler Windsor speedometer pinion
Expert 5K+
Posts: 9915
Location: Lower Mainland BC
mstrug - 2024-03-14 2:30 PM
Look at it. Might just work. Machine off the nub, but I don't have dimensions. It's $10.00!
It would be great if a GM part could be made to work for that price.