best way to flush out a torque converter?
dodge59
Posted 2023-06-08 6:30 PM (#630091)
Subject: best way to flush out a torque converter?



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin

what is the best way to flush out a fwlk cast iron  a-466  torqueflite  trans  Converter ?  My trans is all apart ... just thinking  now would be a good time to flush out .  I read somewhere that some solvents can damage internals . Thanks !

Top of the page Bottom of the page
Powerflite
Posted 2023-06-08 8:52 PM (#630095 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Exner Expert 10K+

Posts: 10107
50005000100
Location: So. Cal		By having it rebuilt.
Top of the page Bottom of the page
dodge59
Posted 2023-06-09 10:10 AM (#630097 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin		question .... what was the idea to have 2 drain plugs on the converter ?
Top of the page Bottom of the page
dodge59
Posted 2023-06-09 10:10 AM (#630098 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin		question .... what was the idea to have 2 drain plugs on the converter ?



(my converter.jpg)



Attachments
----------------
Attachments my converter.jpg (91KB - 104 downloads)
Top of the page Bottom of the page
58coupe
Posted 2023-06-09 10:47 AM (#630099 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Expert

Posts: 1759
10005001001002525
Location: Alaska		very simple, to allow it to drain properly. It may also help keep it in balance. (neutral balance)
Top of the page Bottom of the page
dodge59
Posted 2023-06-09 10:52 AM (#630100 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin		and what does that mean 58coupe ? lay it flat or stand it upright ?
Top of the page Bottom of the page
wizard
Posted 2023-06-09 11:13 AM (#630101 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Board Moderator & Exner Expert 10K+

Posts: 13107
5000500020001000100
Location: Southern Sweden - Sturkö island		Get yourself a manual and read it before you stat with any service



(Flush.png)



Attachments
----------------
Attachments Flush.png (62KB - 92 downloads)
Top of the page Bottom of the page
58coupe
Posted 2023-06-11 12:21 PM (#630153 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Expert

Posts: 1759
10005001001002525
Location: Alaska		The drain plugs on the torque converter were installed so it could be drained while still in the car to be able to do a more complete oil change. Follow the instructions listed above.
Top of the page Bottom of the page
dodge59
Posted 2023-06-11 12:34 PM (#630154 - in reply to #630091)
Subject: Re: best way to flush out a torque converter?



Elite Veteran

Posts: 1018
1000
Location: Milwaukee Wisconsin		Thanks for input guys ! fwlk Best site ever !
Top of the page Bottom of the page