Powerflite trans

moparjoe Posted 2020-06-09 3:52 AM (#599441) Subject: Powerflite trans Member Posts: 31 Location: Melbourne Australia Powerflite 2 speed auto out of my 57 Plymouth. Comes with bellhousing, converter and spacer plate to suit poly v8. Condition is unknown so selling to suit reco. Ph: 0409407775 $250 Pickup only from Reservoir Vic 3073. Edited by moparjoe 2020-06-09 3:57 AM (101486472_10223021697480320_5487852219406236093_o.jpg) (101873488_10223021696880305_3641091064779915375_o.jpg) (102939713_10223021697800328_6901410686723164924_o.jpg) (101930302_10223021698360342_3623152479385871022_o.jpg) (103614644_10223021697760327_3969490765058355185_o.jpg) (20200514_102816.jpg) Attachments ---------------- 101486472_10223021697480320_5487852219406236093_o.jpg (105KB - 925 downloads) 101873488_10223021696880305_3641091064779915375_o.jpg (82KB - 877 downloads) 102939713_10223021697800328_6901410686723164924_o.jpg (108KB - 958 downloads) 101930302_10223021698360342_3623152479385871022_o.jpg (106KB - 890 downloads) 103614644_10223021697760327_3969490765058355185_o.jpg (83KB - 895 downloads) 20200514_102816.jpg (66KB - 910 downloads) Powerflite Posted 2020-06-09 11:37 AM (#599458 - in reply to #599441) Subject: Re: Powerflite trans Exner Expert 10K+ Posts: 10579 Location: So. Cal I believe you can use the converter in your torqueflite as a higher stall option. Good to keep in mind. But to do this, you'll need to use the adapter that will position the starter correctly. Edited by Powerflite 2020-06-09 11:44 AM