|
|
Expert
Posts: 2196
Location: Muskego, WI | Looking for the following trim pieces for my '56 Imperial:
-Passenger side rear wheel well trim
-Passenger and Driver lower rear quarter trim (from behind rear wheel well to rear bumper)
-Horizontal trim above rear bumper (the one that is one piece the entire width of the car)
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)
-Passenger and Driver rocker panel trim
I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well.
Thanks.
Edited by jboymechanic 2020-04-26 12:25 AM
|
|
|
|
Expert
Posts: 1783
Location: calif | how long are thw rocker trim panels u need? |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Looking for the following trim pieces for my '56 Imperial, updated list:
Stainless Steel
-Passenger side rear wheel well trim
-Passenger and Driver lower rear quarter trim (from behind rear wheel well to rear bumper)
-Horizontal trim above rear bumper (the one that is one piece the entire width of the car)
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)
-Passenger and Driver rocker panel trim
Pot Metal
-"eye brow" for front passenger turn signal/parking light, outside half (runs from wheel well to turn signal)
I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well. |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Looking for the following trim pieces for my '56 Imperial:
UPDATED LIST May 1, 2020:
Stainless Steel
-Passenger side rear wheel well trim
-Passenger and Driver lower rear quarter trim (from behind rear wheel well to rear bumper)
-Horizontal trim above rear bumper (the one that is one piece the entire width of the car)
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)
Pot Metal
-"eye brow" for front passenger turn signal/parking light, outside half (runs from wheel well to turn signal)
I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well. |
|
|
|
Expert
Posts: 1783
Location: calif | I have found some of these pieces,PM your email for pictues |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Looking for the following trim pieces for my '56 Imperial:
UPDATED LIST May 8, 2020:
Stainless Steel
-Passenger side rear wheel well trim
-"dog legs" that transition from wheel well trim to rocker trim (there are 4; front driver, front pass, rear driver, rear pass)
Pot Metal
-"eye brow" for front passenger turn signal/parking light, outside half (runs from wheel well to turn signal)
I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well. |
|
|
|
Veteran
Posts: 146
Location: California | Hi,
Here's a few pics from my 56 Imperial 4 door HT parts car.
Regards,
Gary
(IMG_4195.jpg)
(IMG_4196.jpg)
(IMG_4198.jpg)
(IMG_4199.jpg)
(IMG_4200.jpg)
(IMG_4202.jpg)
(IMG_4203.jpg)
(IMG_4205.jpg)
(IMG_4207.jpg)
(IMG_4208.jpg)
(IMG_4209.jpg)
Attachments ---------------- IMG_4195.jpg (108KB - 215 downloads) IMG_4196.jpg (108KB - 216 downloads) IMG_4198.jpg (134KB - 212 downloads) IMG_4199.jpg (78KB - 223 downloads) IMG_4200.jpg (75KB - 255 downloads) IMG_4202.jpg (64KB - 222 downloads) IMG_4203.jpg (104KB - 220 downloads) IMG_4205.jpg (104KB - 234 downloads) IMG_4207.jpg (80KB - 218 downloads) IMG_4208.jpg (77KB - 214 downloads) IMG_4209.jpg (78KB - 214 downloads)
|
|
|
|
Expert 5K+
Posts: 7807
Location: Williams California | Hi Jon,
I have two very nice LH dogleg moldings, the RF has a light scrape in it, and the RR has metal screws holding it on. The RH parking light brow is very nice with no pitting.
---John |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Thank you to Big M and the others on this site that have provided these parts that I've been looking for. Sill looking for a couple of trim pieces for my '56 Imperial:
UPDATED LIST May 13, 2020:
Stainless Steel
-Passenger side rear wheel well trim
-Passenger side rear dogleg (transitions from the rocker to the rear wheel well trim).
I'm looking for pieces that are as straight as possible and don't have any curb rash. Any surviving clips used to attach these pieces would be great as well. |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | UPDATED LIST May 27, 2020:
Stainless Steel
-Passenger side rear wheel well trim
-Passenger side rear dogleg (transitions from the rocker to the rear wheel well trim).
Also need an original front windshield gasket. Must be 1955 or 1956 Imperial, Chrysler or DeSoto with sun visor trim. |
|
|