Hi there I am looking for the gas heater fuel pump to a 1956 Chrysler Imperial Mopar Instant Heat Conditionaire, made by Stewart Warner model 800. I need the fuel line from the engine fuel pump, the fuel pump mounted on the blower, the fuel line from the fuel pump to the heater and the tube from the blower to the the heater. Also am looking for the 2 air deflectors for the trunk mounted A/C unit. These thing mount on each side of the rear deck. The A/C unit is Mark IV from the John E. Mitchell company in Dallas, Tx.
I will try to ad pictures of what I am working with. If the rear deck picture shows, the 2 air deflectors go in the holes where the stuff animals are perched.
please email me if you have or know where I might find these things.
Posted 2018-10-07 4:22 PM (#571276 - in reply to #571266) Subject: RE: Wanted: Heater Fuel pump
Location: Lower Mainland BC
Because I view looking up parts as an interesting challenge and I have some resources that I kind of know my way around, I offer that the fuel pump that you seek is PN 1688 445. The diagrams and parts lists below back that up.
Doing a Google Search on "1688445 heater fuel pump" didn't turn up exactly that part but it did show up some modern day equivalents that would work for you:
Posted 2018-11-11 12:48 PM (#573324 - in reply to #571266) Subject: Re: Wanted: Heater Fuel pump
Update after searching high and low for a number of years I finally have a fuel pump on the way. Broke the rules of a web site since it a lot like the FWL main forums it was on a VW site since some bugs use the Southwind. It is a tiny bit different, but has the top parts I need and it is new NOS pump. IF nothing else at least all the parts that the car was born with will be in it. Might still be friged depending on where it is, but with the hood up all will be complete. Thanks to all that view and replied.
Posted 2019-01-12 12:08 PM (#576653 - in reply to #571266) Subject: Re: Wanted: Heater Fuel pump
Here's an update to my saga for my heater. I finally found a tube that will work for the the blower to the heater unit. It is from a shop vac. The bucket head shop vac home depot carries. Wiered size of 1 1/4 OD x 1 3/8 ID. Too cold to either paint the blower and heater unit or not let alone to hook everything up right now.