|
|
Member
Posts: 32
| Looking for the brake tee that connects the rear and front brakelines with the master cylinder for my 59 dodge (manual brakes)
thanks Wim |
|
|
|
Expert 5K+
Posts: 9681
Location: So. Cal | I need one for a '58 Chrysler. Anyone have one to sell? I have one for a '58 Dodge that I would trade you. The difference is in the bracket & orientation. |
|
|
|
Elite Veteran
Posts: 1102
Location: Hayward, Calif | Check with John at Big M. I needed one when I did wife's 59 Dodge. He mailed it to me. He has a lot of FWLK parts cars. Jerry |
|
|
|
Member
Posts: 32
| Thanks, I have the part, thanks to Tony Cooper. |
|
|
|
Extreme Veteran
Posts: 309
Location: Western Colorado | Nathan,
Is the one you need mounted on top of the frame by the steering column? If so, I'm sure I have one.
Bob |
|
|
|
Expert 5K+
Posts: 9681
Location: So. Cal | Yes, that's it, a brass block with brake lines going to it. Let me know what you want for it and I will pay you. |
|
|
|
Extreme Veteran
Posts: 309
Location: Western Colorado | Nathan,
I'll try to get to the car in the next couple of days to pull it off. Do you need anything else from a 58? I also have a bunch of 56 N/Y'er parts left.
Bob |
|
|
|
Expert 5K+
Posts: 9681
Location: So. Cal | Thanks Bob for selling me the other emblems for it! I just mounted them to the car and they look great! I could use any 2dr side trim if you have any, grille side aluminum panels, a good picture of the fenders where those panels mount (I have to convert some '57 fenders to use here so I am not sure how they go), a good heater box, a 7 button radio would be nice, cruise control engine bay parts, probably other things but I can't think of anything. |
|
|
|
Extreme Veteran
Posts: 309
Location: Western Colorado | Nathan,
I will look and see what I have. I know I have a 7 button radio "somewhere" around here, if I can only find it. I do remember that the faceplate is cracked and I couldn't find one. That I think was the main reason I didn't use it in my wagon. I also have a cruise unit that is very rough and would probably only be good for parts. It is on the parts wagon that sat outside for 20 years without a hood, till I got it. I think I have some grill pieces. I also have a nice r/s fender and a fair L/s if you would rather use them than the 57 ones.
I removed the brake fitting this morning.
I'll get back to you on everything else. Can I email you direct?
Bob |
|
|
|
Expert 5K+
Posts: 9681
Location: So. Cal | Sure, by all means. Thanks. |
|
|
|
Expert
Posts: 2905
Location: little rock, AR | I have a heater boxes for a few FL cars. What is the # of the box that your needing??? |
|
|