decode punch card
57RID500
Posted 2018-01-14 10:48 AM (#556202)
Subject: decode punch card


Regular

Posts: 85
252525
Could someone decode the attached IBM Punch Card for my 1957 Dodge Royal Lancer?

Thank you
Top of the page Bottom of the page
56D500boy
Posted 2018-01-14 11:36 AM (#556209 - in reply to #556202)
Subject: RE: decode punch card



Expert 5K+

Posts: 9925
50002000200050010010010010025
Location: Lower Mainland BC
57RID500 - 2018-01-14 10:48 AM

Could someone decode the attached IBM Punch Card for my 1957 Dodge Royal Lancer? Thank you


Nothing attached.

Try again. This time start your thread in the Fender/VIN Tag and Broadcast Sheet Decoding sub-forum

http://www.forwardlook.net/forums/forums/forum-view.asp?fid=55

Your photo doesn't show because you are probably using a device, e.g. Apple, that puts a .jpeg extension on the file. This FL forum doesn't like those. They have to have .jpg (no "e") extensions.

Then someone might be able to help.



Edited by 56D500boy 2018-01-14 11:36 AM
Top of the page Bottom of the page
57RID500
Posted 2018-01-14 12:01 PM (#556211 - in reply to #556202)
Subject: Re: decode punch card


Regular

Posts: 85
252525
I keep trying, First message is file must be less than 500 mgb! so I cut picture in half, Now message is must be less than 250 MGB!
Top of the page Bottom of the page
56D500boy
Posted 2018-01-14 12:56 PM (#556213 - in reply to #556211)
Subject: Re: decode punch card



Expert 5K+

Posts: 9925
50002000200050010010010010025
Location: Lower Mainland BC
57RID500 - 2018-01-14 12:01 PM I keep trying, First message is file must be less than 500 mgb! so I cut picture in half, Now message is must be less than 250 MGB!


The limit is 250 kB (kilo not mega bytes). 1024 x 764 is usually around 150 kB which is usually an option but with a IBM card you will want to keep resizing until it is just under 250 kB.

And .jpg, not .jpeg, right?
Top of the page Bottom of the page