Posted 2017-09-05 9:29 PM (#547810) Subject: How do I find the hole to thread the antenna wire through firewall?
Member
Posts: 34
I have a 1960 Plymouth and I cannot find the hole in the firewall to run the antenna wire....
Any hints how I can find the HOLE??????
I have opened up the inspection cover in the inner fender and cant see the hole or feel it.
I have climbed under the dash and looked in the right side of the body under the dash and don't see it.
Posted 2017-09-06 8:21 AM (#547825 - in reply to #547820) Subject: RE: How do I find the hole to thread the antenna wire through firewall?
Expert 5K+
Posts: 9911
Location: Lower Mainland BC
57plybel - 2017-09-06 4:35 AM
Is it behind the passenger kick panel and not the firewall itself?Colin
My 56 must have had a CB radio at one time (never came with an AM radio) and there was an aerial on the passenger side cowl, between the windshield and the fender (not on the fender). The hole went down from there into the passenger kick panel area and then over to the radio. (I guess).
Posted 2017-09-06 10:10 AM (#547831 - in reply to #547810) Subject: Re: How do I find the hole to thread the antenna wire through firewall?
Expert
Posts: 1740
Location: Alaska
All i can say is on my 58 Plymouth there is a hole with a removable plug on the right side of the cowl at about the same height as the instrument panel.