Posted 2017-07-19 4:55 PM (#544426) Subject: Anybody know that the PS pump return hose gasket looks like?
Expert 5K+
Posts: 9910
Location: Lower Mainland BC
GASKET 19-58-20 = PN 1485 894 But I don't know what it looks like. Mine is leaking at the non-pressure return hose adapter (19-58-15) and I would like to have one in hand before I remove the hose (and adapter).
Posted 2017-07-21 3:59 PM (#544550 - in reply to #544426) Subject: Re: Anybody know that the PS pump return hose gasket looks like?
Expert
Posts: 3888
Location: Northen Virginia
the gasket it should be only a copper washer. Copper is an amazing material you can heat the old washer in an electric stove and the material fix itself enough to be re-used.
You can also use plumber's seal to put it on the thread before assembly and it will not leak..
Posted 2017-07-22 10:28 AM (#544605 - in reply to #544550) Subject: Re: Anybody know that the PS pump return hose gasket looks like?
Extreme Veteran
Posts: 309
Location: Western Colorado
The sealing washer is copper and is 3/4" ID x 1" OD and is .030 thick. Most good parts houses that have oil pan drain plug assortments and copper gaskets should be able to supply this washer. It won't hurt if the washer is a little thicker.
Bob
(56 Power steering return hose fitting seal 001.JPG)
(56 Power steering return hose fitting seal 002.JPG)
Posted 2017-07-22 11:01 AM (#544607 - in reply to #544605) Subject: Re: Anybody know that the PS pump return hose gasket looks like?
Expert 5K+
Posts: 9910
Location: Lower Mainland BC
hemidenis - 2017-07-21 3:59 PM The gasket it should be only a copper washer. Copper is an amazing material you can heat the old washer in an electric stove and the material fix itself enough to be re-used.
You can also use plumber's seal to put it on the thread before assembly and it will not leak..
rebel - 2017-07-22 10:28 AM The sealing washer is copper and is 3/4" ID x 1" OD and is .030 thick. Most good parts houses that have oil pan drain plug assortments and copper gaskets should be able to supply this washer. It won't hurt if the washer is a little thicker. Bob
Thank you both, gentlemen. I will seek out said washer.