|
|
Expert 5K+
Posts: 9673
Location: So. Cal | A set of 4 spinner hubcaps for a '55-'56 Dodge. The die cast is excellent without pitting and original paint on all but one cap. The diecast needs cleaning, but is good. These are 15" of course. $200 for the set of 4 plus shipping.
Edited by Powerflite 2017-04-22 1:00 PM
|
|
|
|
Member
Posts: 25
Location: Ventura California | Can I get some pics of the Spinner Caps ?
Please send to desoto6x2@aol.com
Thank You ! |
|
|
|
Expert 5K+
Posts: 9673
Location: So. Cal | I'll try to get some pics tomorrow morning and post them here. You are pretty close to me. I used to work out in Santa Barbara. |
|
|
|
Elite Veteran
Posts: 792
Location: Buena Park, CA | Nathan, you know i will take them if they are pretty clean. I have a couple of sets that I am going to combine into one good set. Are the centers black and white ('55) or blue and white with red ('56)?
Dave |
|
|
|
Expert 5K+
Posts: 9673
Location: So. Cal | These have been sitting in the garage of the father of a friend of mine since at least the early 80's. Like I said, the pot metal is dirty, but not pitted. The top right one is missing the original paint and has a little bit of crazing but should mostly clear off as well. I cleaned off the pot metal on the bottom right in the circle to try and show how well they clean up. They are really nice. There are a couple of small dents here and there. The centers are black and white with red. Not sure what that means.
(55-56 Spinners.jpg)
Attachments ---------------- 55-56 Spinners.jpg (226KB - 79 downloads)
|
|
|
|
Elite Veteran
Posts: 792
Location: Buena Park, CA | I think they are 55's. The black is a light to medium blue on the 56's. |
|
|