Gary Goers
1960-FURY
Posted 2017-03-20 6:20 PM (#536320)
Subject: Gary Goers


Veteran

Posts: 140
10025
Hope all is well ,, Not Sure how to ask this , is Gary doing ok ? Sent an order last December with no response back. I have ordered in past.

He has always came through.
Top of the page Bottom of the page
Greg P.
Posted 2017-03-22 6:53 PM (#536470 - in reply to #536320)
Subject: RE: Gary Goers



Elite Veteran

Posts: 769
5001001002525
Location: Oley, PA
I've heard on some of the other forums that he is dealing with some medical issues - one surgery done and at least one more still to go. As of January 2017, he temporarily stopped taking orders. No idea as to when he'll be back, but the word is optimistic that he will.

This copied from the Facebook Forum:

From Ian J Smale For those who don;t know what is happening with Gary: This is from Rich Barber of the Chrysler 300 Club:

"Due to circulation and other problems, he had the end two joints of his left big toe amputated—the first of three major surgeries. Although the surgery went OK, he was disappointed the surgeon took two joints instead of one. Problems with his severely-damaged left ankle have necessitated replacement of his right hip joint. That surgery will be delayed for three months to make sure his body is healed enough to make the hip replacement safe. After healing from the hip replacement, he will be scheduled for amputation of his left foot below the knee. That’s the mixed news for Gary. There is light at the end of the long tunnel.

For the rest of us who value Gary as a friend, as well as a provider of otherwise unobtainium items for our 300’s, the good news is that it appears there is a plan to return him to a full mobility, pain-free and productive existence and continuation of his business providing over 700 restoration items from screws to full leather seat covers. Additionally, in the interim, Gary continues the majority of his business as his limited mobility allows. He says he is catching up on back orders somewhat and is taking orders. He is molding rubber parts but trunk panel kits are on hold until warmer & dryer weather when they can be properly painted. He is working on seat sets and has a big batch of leather coming for more. New seat orders are at least a couple months out. He said he would appreciate knowing of customers wants and needs for seating and other major items in advance so he can plan to have material on hand when needed."

Maybe someone has updated info?
Top of the page Bottom of the page
b5rt
Posted 2017-03-22 8:08 PM (#536479 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 2453
20001001001001002525
Location: central Illinois
I sent in a small order a few weeks ago and got it back in a little over a week so I believe he might be getting some help?

Please note that he wishes all orders to include a 10% increase over the prices on his last list.
Top of the page Bottom of the page
GaryS
Posted 2017-03-23 7:18 AM (#536511 - in reply to #536320)
Subject: Re: Gary Goers



Elite Veteran

Posts: 1053
10002525
Location: Ponder, TX
I sent a small order for rubber parts a few weeks ago and it arrived in about ten days.
Top of the page Bottom of the page
1960-FURY
Posted 2017-03-23 6:10 PM (#536542 - in reply to #536511)
Subject: Re: Gary Goers


Veteran

Posts: 140
10025
Thanks all,

Great that he is doing well, Great guy and valuable asset to all !
Top of the page Bottom of the page
1961plymouthfury
Posted 2017-03-23 8:35 PM (#536550 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 2389
2000100100100252525
Location: Minor Hill, TN
I ordered a trunk card board kit for my '61 and it has not arrived yet, I ordered it a month ago
Top of the page Bottom of the page
1961plymouthfury
Posted 2017-05-22 12:08 AM (#540560 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 2389
2000100100100252525
Location: Minor Hill, TN
I still have not received my trunk card board kit I hope Gary has fully recovered from his illness
Top of the page Bottom of the page
imopar380
Posted 2017-05-22 10:31 AM (#540592 - in reply to #540560)
Subject: Re: Gary Goers



Expert 5K+

Posts: 6870
500010005001001001002525
Location: Victoria, BC, on Vancouver Island, Canada
Steph give him a little more time. I believe he makes each set of these as they are ordered, and it could be difficult if he is still recovering from amputation surgery. If your order was placed and your check was cashed, you'll get them, hopefully soon
Top of the page Bottom of the page
1961plymouthfury
Posted 2017-05-23 11:17 PM (#540773 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 2389
2000100100100252525
Location: Minor Hill, TN
I got my trunk card board kit to day . I still wish Gary a full recovery.
Top of the page Bottom of the page
jboymechanic
Posted 2018-01-09 12:35 PM (#555916 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 1536
100050025
Location: Muskego, WI
I just mailed a small order before Christmas, received my trim fasteners just after New Year's.
Top of the page Bottom of the page
mikes2nd
Posted 2018-01-09 3:42 PM (#555924 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525
I got my tail light turn signals quick.
Top of the page Bottom of the page
Beltran
Posted 2018-01-12 8:12 PM (#556130 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 1719
1000500100100
Location: Michigan
Mike M. what came of the review of taking over his business?
Top of the page Bottom of the page
Mike McCandless
Posted 2018-01-13 7:02 AM (#556141 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 1696
1000500100252525
Waiting for him to get home from rehab, get mobile within his shop, then fly out to inspect the place. Talked to him this week. Hopefully get out there in 2-3 weeks depending on his progress. Will do an overnight to see what I'm getting into. Come up with an outline for an agreement, to see if it works for both. If it does, send someone for a week to apprentice under him for 7-10 days to learn his process's and go from there. IT's not a short process.
Top of the page Bottom of the page
DEH
Posted 2018-01-13 9:27 AM (#556145 - in reply to #536320)
Subject: Re: Gary Goers



Veteran

Posts: 100
100
Location: Falcon, CO
Mike, thanks so much for taking the time to follow up on this. I bought many small parts from Gary that were invaluable in restoring my 57 Dodge. I'm sure many others could say the same for their vehicles. It would be especially nice to see the business "stay in the family", so to speak.

Don H.
Top of the page Bottom of the page
Mike McCandless
Posted 2018-01-13 9:53 AM (#556147 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 1696
1000500100252525
There will be challenges of course. There is no formal inventory system, it's what is in his head, which is everything. Also, cost of goods vs what he's selling. It needs to be a viable business. I'll have a lot of work to do once I visit to get a true costs of goods to make sure this can function as a viable business. I have a possible location where this would work. Next trick is upholstery, as I think I have that figured out as well. A lot of variables, but I'm sure it can be worked out. What I lack in forward look knowledge, I make up for with business knowledge. We will see!
Top of the page Bottom of the page
mstrug
Posted 2018-01-13 2:50 PM (#556162 - in reply to #536320)
Subject: Re: Gary Goers



Expert 5K+

Posts: 5786
5000500100100252525
Location: Newark, Texas (Fort Worth)
I and a bunch of us hope it work out. Can you imagine trying to get 'Classic, Vans, Steele, or Year One' to make these little parts? One piece windshields and backlight seals/gaskets would be great. Marc.
Top of the page Bottom of the page
di_ch_NY56
Posted 2018-01-14 2:28 PM (#556219 - in reply to #556162)
Subject: Re: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

I just sent a fax with few part of the out of the shelf category, prepaid by PayPal. The fax's ringing but no answer. It seems the fax machine is out of work right now. God bless Gary Goers and serves him a fast recovery and a good solution for him (I know he would retire).

Dieter

( 2 x #292, 2 x #310, 6 x #16 and 8 x #386)

Top of the page Bottom of the page
Darryl T
Posted 2018-02-07 6:28 PM (#557660 - in reply to #536320)
Subject: RE: Gary Goers



Veteran

Posts: 243
10010025
Location: McCleary WA
I sent an order to Gary 12/1 and received it 2/5, with only one part unfilled (out of 15). Along with it was a letter from Gary detailing his health issues and stating that a helper would be filling orders from stock as much as possible, but that labor-intensive items would be a problem. He also asked that orders add 10% due to added costs that have not been reflected in his catalog prices for a long time.

I know we all wish him a speedy recovery and a sale of his business if that is his best move.
Top of the page Bottom of the page
mikes2nd
Posted 2018-02-07 9:08 PM (#557664 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525
glad to hear they are back up and running. I got mine in before Gary went to the doctor quickly. Like in two weeks but I made sure he had it all in stock.
Top of the page Bottom of the page
di_ch_NY56
Posted 2018-02-09 2:49 PM (#557773 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

On both orders I sent by fax (only the first, acutally the fax machine still doesn't answer) I increased the prices (at the form) by between 10 % and 25 % on my own. Good luck I added the parts (and amount) on the PayPal transfer for the second order....

Dieter

Top of the page Bottom of the page
di_ch_NY56
Posted 2018-02-10 4:50 AM (#557820 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

The first order I placed 01/04/18 has arriven. I was close to get tears in my eyes. Thank you very much. I wish a speedy recovery and many helping hands.

Happy Restoring!

Dieter

Top of the page Bottom of the page
hemidenis
Posted 2018-02-11 1:01 AM (#557884 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 3700
20001000500100100
Location: Northen Virginia
I know a person who has been waiting for almost a year with a more than thousand dollars purchase...So I don't get it what's going on.
Top of the page Bottom of the page
mikes2nd
Posted 2018-02-11 2:11 AM (#557886 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525
He may have to produce the part. That takes his time, they are filling orders of in stock items.

What did they order?

I got some emblems and lenses, 58 dodge turns and 57 Chrysler turns and 300c emblem

Top of the page Bottom of the page
Dave L.
Posted 2018-02-13 11:25 PM (#558078 - in reply to #536320)
Subject: Re: Gary Goers



Extreme Veteran

Posts: 324
100100100
Location: Tacoma, WA
Someone shared with me that Gary had yet another surgery, and I believe that was after his letter from late 2017 where he explained, "My legs are so bad that I can barely walk at all. Even with a walker I am very limited. I've been inundated with orders for Chrysler 300 seats to do, am managing to make progress on those and will finish them all by early next year. I can still take small parts orders, but not large items such as trunk panels....I thank you for your patronage over the past decades and hope to be able to keep supplying parts..." I'm sure especially the large items and cutting and sewing leather is a real challenge when everybody probably starting flooding him with orders (including me two years ago) and just living life and getting around has become a serious, tiring challenge. But I am sure the doctors didn't remove his honestly.

Edited by Dave L. 2018-02-13 11:35 PM
Top of the page Bottom of the page
floyd066
Posted 2018-02-18 1:55 AM (#558289 - in reply to #536320)
Subject: Re: Gary Goers



Extreme Veteran

Posts: 344
10010010025
Location: Vancouver, Wa the "Couv"
I'm not quite done with my complete restoration so having the products that Gary sells is really invaluable. No one carries parts for the 55-56 Chrysler and DeSoto cars. It's great there is some positive talk on the future of the business. I can sleep better at night.
Top of the page Bottom of the page
uncltank
Posted 2018-02-23 12:29 PM (#558676 - in reply to #536320)
Subject: Re: Gary Goers


Extreme Veteran

Posts: 345
10010010025
Location: Kennewick Wa
Hope all goes well for him... I got my order 2/6 after only 4 weeks.
Top of the page Bottom of the page
firedome
Posted 2018-02-23 3:26 PM (#558700 - in reply to #558676)
Subject: Re: Gary Goers



Expert

Posts: 2990
2000500100100100100252525
Location: NY & VT
Mike M. any update on continuing the business? A lot of FL folks depend on Gary and there is no alternative for much of what he provides.
Gary got his start working with and for Richard Carpenter, too bad RC can't also help with his near limitless resources and profound love of FL cars
Top of the page Bottom of the page
di_ch_NY56
Posted 2018-03-13 11:03 AM (#559801 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

In the first parcel was a copy of the fax with the amount I payed too much. But neither the second order nor the back transfer has arriven until now. The parts for the second order I put as a sidemark into the comment field of the money transfer (PayPal).

I really don‘t know if I‘ll get the second order. Of course it‘s my fault I didn’t order ways earlier.

Still I wish superb healing and recovery for Gary Goers. And a good solution to put over his business to younger hands as he wishes.

Happy Restoration!

Dieter

Top of the page Bottom of the page
antonellomopar
Posted 2018-03-13 3:16 PM (#559816 - in reply to #536320)
Subject: Re: Gary Goers


Extreme Veteran

Posts: 356
1001001002525
Location: milano, italy
placed an order in september, paid with a check. No news until a week ago, when I received a partial shipment of parts. Some are still missing. Hope to get the missing parts or a refund.
Top of the page Bottom of the page
mstrug
Posted 2018-03-13 4:59 PM (#559826 - in reply to #536320)
Subject: Re: Gary Goers



Expert 5K+

Posts: 5786
5000500100100252525
Location: Newark, Texas (Fort Worth)
Let us all say a prayer for for him.
Top of the page Bottom of the page
ronbo97
Posted 2018-04-27 10:55 PM (#562398 - in reply to #559826)
Subject: Re: Gary Goers


Expert

Posts: 3307
20001000100100100
Location: Connecticut

Ordered some weatherstripping from Gary about three weeks ago. The order came today. So his wife and helper are apparently getting the orders filled for common items.

Ron

Top of the page Bottom of the page
floyd066
Posted 2018-04-29 12:32 PM (#562474 - in reply to #536320)
Subject: Re: Gary Goers



Extreme Veteran

Posts: 344
10010010025
Location: Vancouver, Wa the "Couv"
I still need some things from Gary. Hope the future is a promising one. Let's keep the updates coming.
Top of the page Bottom of the page
rebel
Posted 2018-08-03 8:26 PM (#567758 - in reply to #536320)
Subject: RE: Gary Goers


Veteran

Posts: 203
100100
Location: Western Colorado
Just received some items from Gary and he included this letter. Some of his comments don't make much sense but I do hope his health continues to improve.
Bob



(Gary Goers Letter 002.JPG)



Attachments
----------------
Attachments Gary Goers Letter 002.JPG (114KB - 146 downloads)
Top of the page Bottom of the page
Mike McCandless
Posted 2018-08-03 9:06 PM (#567766 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 1696
1000500100252525
I have passed on the opportunity as my other business ventures are consuming way too much of my time. I was able to pass information on to someone who I had a lot of trust in, who is MORE than capable. I know they're set to meet and hopefully all goes well.
Top of the page Bottom of the page
Beltran
Posted 2018-08-05 7:05 PM (#567856 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 1719
1000500100100
Location: Michigan
Critical for all of us that his business keeps going in some form. I wish only the best for Gary. Can't say the guy hasn't given it his all...
Top of the page Bottom of the page
Darryl T
Posted 2018-09-11 11:24 PM (#569986 - in reply to #567856)
Subject: Re: Gary Goers



Veteran

Posts: 243
10010025
Location: McCleary WA
Thought I'd report that I submitted an order to Gary 8/28 for 15 rubber parts, and received them all yesterday, less than 2 weeks later. I even re-ordered a very hard-to-find pair of wagon tailgate seal corners that were the only thing in my last order that was not sent, and got them too. I don't know if Gary has a helper, but this was unexpectedly fast service.

I've given some thought to approaching him about taking on his business. I ran a very successful mail-order parts business (for DeLoreans) for 18 years so have some experience, but just don't feel like I have the Mopar knowledge to do justice to his legacy. My FWDLK experience is pretty much limited to '57 Dodges. I don't have the room for inventory any more, plus at 69 I think it would be too much to take on now. I hope someone comes forward and helps us all out.
Top of the page Bottom of the page
mikes2nd
Posted 2018-09-11 11:28 PM (#569988 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525
I just got my check sent back. no 300C bezels... sold out
Top of the page Bottom of the page
1961plymouthfury
Posted 2018-09-12 2:51 AM (#569991 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 2389
2000100100100252525
Location: Minor Hill, TN
Gary should have some one like a family member or a friends run the business for him.
Top of the page Bottom of the page
hemidenis
Posted 2018-09-26 4:37 PM (#570797 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 3700
20001000500100100
Location: Northen Virginia
any news of Gary? does someone ordered cast molded rubber parts like brake pedals and such? Thanks
Top of the page Bottom of the page
57desoto
Posted 2018-10-02 5:18 AM (#571044 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 1399
1000100100100252525
Location: New Castle PA
I'm also looking for info on who may be taking things over from Gary. I've been asked by several people to help locate parts, and Gary was the only source for some things...
Top of the page Bottom of the page
Ev's62Chrysler
Posted 2018-10-02 6:21 AM (#571047 - in reply to #570797)
Subject: Re: Gary Goers



Veteran

Posts: 148
10025
Location: Suwanee, GA
hemidenis - 2018-09-26 4:37 PM

any news of Gary? does someone ordered cast molded rubber parts like brake pedals and such? Thanks


I received a few items Saturday that I ordered ~10 days prior. One item was a parking brake pedal pad for my 62, but I did not order anything requiring a core.
Top of the page Bottom of the page
Beltran
Posted 2018-10-02 6:54 PM (#571068 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 1719
1000500100100
Location: Michigan
How are you ordering? letter, fax, phone?
Top of the page Bottom of the page
hemidenis
Posted 2018-10-02 7:07 PM (#571071 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 3700
20001000500100100
Location: Northen Virginia
thanks guys, i will be ordering the best way possible, maybe fax?

Edited by hemidenis 2018-10-02 7:08 PM
Top of the page Bottom of the page
Ev's62Chrysler
Posted 2018-10-02 8:47 PM (#571078 - in reply to #536320)
Subject: Re: Gary Goers



Veteran

Posts: 148
10025
Location: Suwanee, GA
I mailed a letter with check. No inquiry beforehand. He was out of 61/62 Chrysler/DeSoto parking lenses though and enclosed a check in the shipment for the difference. A very kind man to do business with.
Top of the page Bottom of the page
hemidenis
Posted 2018-10-09 1:40 PM (#571387 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 3700
20001000500100100
Location: Northen Virginia
My box arrived to his address today according to the tracking number, if he collect the check then i'm with luck.
Top of the page Bottom of the page
AngRi
Posted 2018-10-12 8:42 PM (#571586 - in reply to #571387)
Subject: Re: Gary Goers




Location: Naperville, IL
I recently sent a couple of orders via regular mail (with a check enclosed) totaling well over 50 items and got almost all of them in three weeks from the order. Some lenses and special items were not available, but all the rubber and metal parts were. Also talked with Gary over the phone, and although he is in a wheelchair, he is still able to mold rubber pieces and also has plenty of inventory left in weatherstrip rubber etc. But he is about to retire and is actively working on getting his business transferred over.
Top of the page Bottom of the page
AngRi
Posted 2018-10-12 8:46 PM (#571587 - in reply to #571586)
Subject: Re: Gary Goers




Location: Naperville, IL
And current pricing is Catalog #10 price list $$$ + 30%
Top of the page Bottom of the page
mikes2nd
Posted 2018-10-12 10:25 PM (#571591 - in reply to #571586)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525

AngRi - 2018-10-12 8:42 PM I recently sent a couple of orders via regular mail (with a check enclosed) totaling well over 50 items and got almost all of them in three weeks from the order. Some lenses and special items were not available, but all the rubber and metal parts were. Also talked with Gary over the phone, and although he is in a wheelchair, he is still able to mold rubber pieces and also has plenty of inventory left in weatherstrip rubber etc. But he is about to retire and is actively working on getting his business transferred over.

 

Transferred over to who? 

Top of the page Bottom of the page
di_ch_NY56
Posted 2018-10-20 9:30 AM (#572030 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

Cheryl and Dave Mihalko, owners of Quirey Quality Design have recently reached an agreement with Gary Goers to purchase his business.  Quirey Quality Design is the manufacturer of plastic and rubber goods along with the Topcat Whisker brand of belt line weather stripping for the Mopar industry covering the years 1953-and up.  We have 40 years of experience in the restoration hobby.  Quirey is currently located in Windber, PA.  We utilize CNC machines, injection machines and other modern technology to make top quality products for the restoration market. The addition of Gary Goers' parts have allowed us to increase our coverage of products for Chrysler automobiles.  We are extremely excited about this new venture.  We both are currently at Garys in Kalispell  MT working on packing the business up for the move to Windber PA, so it t will be a few weeks before we back in PA, unpacked and are up and running smoothly.  Here is our contact information for all orders:

 

Quirey Quality Design Co.

 

3200 Graham Ave

Windber, Pa 15963

out of the latest Chrysler 300 Letter Club International information

Happy Restoring!

Dieter

Top of the page Bottom of the page
wizard
Posted 2018-10-20 10:04 AM (#572031 - in reply to #536320)
Subject: Re: Gary Goers



Board Moderator & Exner Expert 10K+

Posts: 11942
50005000100050010010010010025
Location: Southern Sweden - Sturkö island
Thanks' Dieter! It seems like they don't have a homepage yet?
Top of the page Bottom of the page
mikes2nd
Posted 2018-10-20 11:01 AM (#572037 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525
Awesome I am in driving distance

and your close to Carlisle/Hershey!
Top of the page Bottom of the page
Beltran
Posted 2018-10-20 12:56 PM (#572047 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1719
1000500100100
Location: Michigan
Wow that is freaky. I cannot find ANY web presence of this Quirey Quality company. Found a guy on linkedIn that works there. But they are like completely off the grid. Even Gary Goers has a home page with a link to his catalog.
Top of the page Bottom of the page
hemidenis
Posted 2018-10-20 1:56 PM (#572054 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 3700
20001000500100100
Location: Northen Virginia
Not surprising Mark, pretty much every manufacture of FL parts are like that, including the guys in Europe, which they don't even bother in answer requests...
Top of the page Bottom of the page
Chopper John
Posted 2018-10-21 9:38 AM (#572104 - in reply to #572054)
Subject: Re: Gary Goers



Expert

Posts: 1445
100010010010010025
Location: Florida
A Google websearch:
https://www.google.com/search?source=hp&ei=f4nMW-_eAsHUzwKKm5rICw&q=...
Top of the page Bottom of the page
Beltran
Posted 2018-10-21 9:53 AM (#572105 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 1719
1000500100100
Location: Michigan
Ya found there address and yes they exist on the map. But no website.
Top of the page Bottom of the page
ronbo97
Posted 2018-10-21 11:00 AM (#572109 - in reply to #572105)
Subject: Re: Gary Goers


Expert

Posts: 3307
20001000100100100
Location: Connecticut

Here is their phone number: 814-509-6410. I don't see a website, but I believe they can be contacted at quireyqualitydesignco@gmail.com

Ron

 
Top of the page Bottom of the page
60 Imp
Posted 2018-10-25 7:17 AM (#572337 - in reply to #536320)
Subject: RE: Gary Goers


20001000100252525
Location: North Australia
This is great news. I hope Gary is doing OK, and I hope he is happy knowing his legacy will continue, I know lots of future customers for these part will be! Gary is a stand-up guy.

Denis, you are 100% right, these cars are a difficult proposition when sourcing parts. I'll bet every one of us is hoarding boxes of stuff.

Steve.
Top of the page Bottom of the page
Quirey300
Posted 2018-11-01 5:18 PM (#572766 - in reply to #536320)
Subject: Re: Gary Goers


New User

Posts: 1

We are back in Pa awaiting the trucks of inventory to arrive from Montana. Quirey currently does not have a website because we have exclusively been a manufacturer supplying the best Mopar vendors in the world. We will continue to use Goers’s part numbers and catalog until new ones are produced. We are available M-Th 9-5 and will answer all responses by phone or email. We also plan to have a presence at various shows throughout the year. We are taking orders and will ship once trucks are unloaded. Please feel to call if you have any questions. Thank you.
Top of the page Bottom of the page
di_ch_NY56
Posted 2018-11-04 7:53 AM (#572883 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

Big thank you for your information. Personally I wish good luck and I‘m waiting as well for more updates if you don‘t mind.

Happy Restoring!

Dieter

Top of the page Bottom of the page
imopar380
Posted 2018-11-04 3:40 PM (#572911 - in reply to #572883)
Subject: Re: Gary Goers



Expert 5K+

Posts: 6870
500010005001001001002525
Location: Victoria, BC, on Vancouver Island, Canada
From Facebook :

Gary Goers parts will be Available soon from PA:
Cheryl and Dave Mihalko, owners of Quirey Quality Design have recently reached an agreement with Gary Goers to purchase his business. Quirey Quality Design is the manufacturer of plastic and rubber goods along with the Topcat Whisker brand of belt line weather stripping for the Mopar industry covering the years 1953-and up. We have 40 years of experience in the restoration hobby. Quirey is currently located in Windber, PA. We utilize CNC machines, injection machines and other modern technology to make top quality products for the restoration market. The addition of Gary Goers' parts have allowed us to increase our coverage of products for Chrysler automobiles. We are extremely excited about this new venture. We both are currently at Garys in Kalispell MT working on packing the business up for the move to Windber PA, so it t will be a few weeks before we back in PA, unpacked and are up and running smoothly. Here is our contact information for all orders:

Quirey Quality Design Co.

3200 Graham Ave

Windber, Pa 15963

814-467-6841

Out of the latest Chrysler 300 Letter Club International information.

His catalog is online as a PDF., add 30%
Top of the page Bottom of the page
floyd066
Posted 2018-11-16 1:19 AM (#573640 - in reply to #536320)
Subject: Re: Gary Goers



Extreme Veteran

Posts: 344
10010010025
Location: Vancouver, Wa the "Couv"
Wow!!!! I am mixed emotions with this news. Not sure the future with this purchase. Many forward lookers are depending on Gary's business. I am not finished with my 56. I am nervous. Gary, hope this gives you peace. Thanks for all you have done for our Big 3 "orphans".
Top of the page Bottom of the page
di_ch_NY56
Posted 2018-12-30 9:18 AM (#576016 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

Last week I did a phone call to Quirey Quality Design Co and got Todd at the other end. According  Noel Hastalis (owner of a 300F) the Chrylser 300 International Club does not order for members.

At the phone call I asked if I could get a complete set of cushions for my 300F. Todd asked if I would like to get a set of seat covers as well. I agreed. I had to write a confirmation via email. The email adress is above in an other answer.

I got the answer, that I‘ll get the price when the work has performed.

I assume to get parts out of the catalogof Gary Goers, just write an email with the parts you wish, GG-Catalog plus 30% (to estimate the price) and provide your address.

Happy Restoring!

Dieter

Top of the page Bottom of the page
dlyle
Posted 2018-12-30 11:27 PM (#576046 - in reply to #536320)
Subject: Re: Gary Goers



Veteran

Posts: 236
10010025
Location: Morgan Hill, CA
I placed an order with Todd at Quirey and about a week later I had my parts. Very happy with their service.
Top of the page Bottom of the page
floyd066
Posted 2019-01-03 11:40 PM (#576233 - in reply to #576046)
Subject: Re: Gary Goers



Extreme Veteran

Posts: 344
10010010025
Location: Vancouver, Wa the "Couv"
what were the parts you ordered?
Top of the page Bottom of the page
dlyle
Posted 2019-01-04 1:46 PM (#576260 - in reply to #536320)
Subject: Re: Gary Goers



Veteran

Posts: 236
10010025
Location: Morgan Hill, CA
I ordered window sweeps, rubber parts, the chrome medallions for my 57, window channels, core support rubber and several other pieces. Good quick service and I used all of Gary's part numbers.
Top of the page Bottom of the page
di_ch_NY56
Posted 2019-01-16 10:32 AM (#576865 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

With Quirey Quality Design Co I got very good results in the communicativ way. First I got an announcement that the company started to build the 55/56 Chrysler seat covers. Soon as they are done they will start with the 300F seat covers. Then I‘ll get a specific time frame until completed. I asked about the color to make sure I‘ll get the stock tan color. Todd answered they‘ll use Garys leather they got. This is almost an exceptional superb service I got.

Happy Restoring

Dieter

Top of the page Bottom of the page
Doright
Posted 2019-02-19 6:41 PM (#578404 - in reply to #536320)
Subject: Re: Gary Goers


Veteran

Posts: 221
100100
I just talked with the people at Quirey Quality Design Very nice people looking forward to making my first purchase with them.
They are still using Garys old catalog numbers at this time as well.
Top of the page Bottom of the page
hemidenis
Posted 2019-02-19 7:18 PM (#578405 - in reply to #536320)
Subject: Re: Gary Goers



Expert

Posts: 3700
20001000500100100
Location: Northen Virginia
I talk to them too and they said casting will be done next week, that was 2 moths ago.
Top of the page Bottom of the page
mikes2nd
Posted 2019-02-19 10:12 PM (#578418 - in reply to #536320)
Subject: Re: Gary Goers


Expert

Posts: 3682
20001000500100252525
I got my 300C bezel quickly. Its not perfect but it'll do. Gary thought he was out, turns out he has some in stock.

He didn't make them I know, and it will look fine.
Top of the page Bottom of the page
di_ch_NY56
Posted 2019-06-01 8:20 AM (#582789 - in reply to #536320)
Subject: RE: Gary Goers



Expert

Posts: 1243
100010010025
Location: ZH, Switzerland

Hello all (Wizard included) some of you asked for the home page of Quirey Quality Design Co. Here it is link to Quirey Quality Design Co.

Dieter

Top of the page Bottom of the page
wizard
Posted 2019-06-01 11:15 AM (#582796 - in reply to #536320)
Subject: Re: Gary Goers



Board Moderator & Exner Expert 10K+

Posts: 11942
50005000100050010010010010025
Location: Southern Sweden - Sturkö island
Thanks' Dieter!
Top of the page Bottom of the page