1957 Plymouth Plaza 4 door sedan
evrydahero
Posted 2017-01-05 10:17 AM (#530483)
Subject: 1957 Plymouth Plaza 4 door sedan


Member

Posts: 44
25
Car is 99% complete, but 6 cylinder is out of car and front end is off of car. Only missing lower grille, radio, and front valances. Nice frame nice wheels and white walls. Interior seats redone. Very solid car very straight. Two small spots of body repair that still needs finished. Car comes with every switch and bezel and every other part not mentioned as missing. Driver side window cracked. All other glass good. Both bumpers need redone. Im looking to trade this entire car with clear title for some 58 & if the same 57 Plymouth hardtop parts. I need a pair of quarter panels from either a two door hardtop or sedan. I need a pair of 58 fenders, a rear back glass with seal, the gold v grille emblem with mounting piece, and a pair of hardtop doors. Body pieces need to be as rust free as possible. Glass not cracked with good seal. Doors complete. Was looking to start at $4000 for the car if cash offers are made, but really need the parts. Im in northeast Ohio. Ill try to add pictures if you see any I can email or text pictures. Pm for info.




(new1.jpg)



(2.jpg)



(3.jpg)



(4.jpg)



(5.jpg)



(6.jpg)



(7.jpg)



(8.jpg)



(9.jpg)



(10.jpg)



(11.jpg)



(12.jpg)



(13.jpg)



Attachments
----------------
Attachments new1.jpg (35KB - 124 downloads)
Attachments 2.jpg (35KB - 108 downloads)
Attachments 3.jpg (24KB - 116 downloads)
Attachments 4.jpg (33KB - 110 downloads)
Attachments 5.jpg (36KB - 117 downloads)
Attachments 6.jpg (28KB - 117 downloads)
Attachments 7.jpg (41KB - 116 downloads)
Attachments 8.jpg (35KB - 124 downloads)
Attachments 9.jpg (37KB - 114 downloads)
Attachments 10.jpg (43KB - 124 downloads)
Attachments 11.jpg (39KB - 123 downloads)
Attachments 12.jpg (33KB - 132 downloads)
Attachments 13.jpg (30KB - 115 downloads)
Top of the page Bottom of the page
evrydahero
Posted 2017-01-06 3:19 PM (#530637 - in reply to #530483)
Subject: Re: 1957 Plymouth Plaza 4 door sedan


Member

Posts: 44
25
I should have said I have 99% of the car and its parts but it needs put together. The car looks just like it is in the pictures they were all taken this week. I know quarter panels will probably be unavailable but maybe some has patch panels....needing the wheel well area and lower area from wheel well to bumper. Please anyone interested in the car or having these parts let me know.
Top of the page Bottom of the page
Chrispy
Posted 2017-01-07 11:50 AM (#530693 - in reply to #530483)
Subject: Re: 1957 Plymouth Plaza 4 door sedan



Extreme Veteran

Posts: 520
500
Location: Colorado Springs, Colorado
Put it back together and sell it as complete as you can, you'll get the money you need to just buy the stuff straight up. 58 parts are too valuable for just about anyone to take the trade for a non running, not complete 6 cyl car anyways. Not trying to be harsh, its just the reality of it.
Top of the page Bottom of the page
evrydahero
Posted 2017-01-14 5:57 PM (#531365 - in reply to #530483)
Subject: Re: 1957 Plymouth Plaza 4 door sedan


Member

Posts: 44
25
SOLD
Top of the page Bottom of the page