59 Regent engine mounts

1957 Fargo Posted 2016-11-17 1:34 PM (#526491) Subject: 59 Regent engine mounts Member Posts: 19 Location: Grimshaw Alberta I have a 1959 Regent that was originally a 313 car that i am putting a 361 into, my question is are the mounts on the frame the same, I understand the engine side will be different. Thanks Matthew Keij Posted 2016-11-18 6:53 AM (#526540 - in reply to #526491) Subject: Re: 59 Regent engine mounts Extreme Veteran Posts: 481 Location: The Netherlands Yep, same mounts on the frame! 1957 Fargo Posted 2016-11-22 12:48 AM (#526813 - in reply to #526491) Subject: Re: 59 Regent engine mounts Member Posts: 19 Location: Grimshaw Alberta Awesome! Thanks! 1957 Fargo Posted 2017-03-23 12:27 PM (#536529 - in reply to #526813) Subject: Re: 59 Regent engine mounts Member Posts: 19 Location: Grimshaw Alberta Just trying to clarify what i need, the frame mounts are the same but i will need the engine side from a big block correct? 58coupe Posted 2017-03-23 9:45 PM (#536556 - in reply to #526491) Subject: Re: 59 Regent engine mounts Expert Posts: 1740 Location: Alaska The frame mounts are the same for all the V-8s but the engine side mounts (where they actually bolt to the engine) are different between the B-RB and the smaller engines. You could probably modify your old 313 mounts to fit the 361 if you are able to do a little fabrication. 1957 Fargo Posted 2017-03-24 10:04 AM (#536587 - in reply to #536556) Subject: Re: 59 Regent engine mounts Member Posts: 19 Location: Grimshaw Alberta That's what I thought, thanks for the clarification! I don't have the original mounts but have a couple leads on some, if the poly mounts are similar than I'm good with modifying a set of them as well, it'll broaden the search parameters a little anyways!