Dome Lamp Assembly

ToMopar Posted 2016-10-04 5:47 AM (#522602) Subject: Dome Lamp Assembly Elite Veteran Posts: 1159 Location: D-70199 Heslach I have here a dome lamp w/ switch and wonder how to wire the switch. The problem is the switch itself, because I think it should have two connections, but the aren't. Is there somebody with a picture of a connected assembly (Dome Wireing.jpg) (3137e.jpg) (3137d.jpg) Attachments ---------------- Dome Wireing.jpg (2KB - 182 downloads) 3137e.jpg (52KB - 166 downloads) 3137d.jpg (62KB - 186 downloads) 57chizler Posted 2016-10-04 3:39 PM (#522640 - in reply to #522602) Subject: RE: Dome Lamp Assembly Expert Posts: 3779 Location: NorCal The dome lamp bulb normally has two contacts; power flows into one contact, through the bulb, and to the door jamb switch which provides the ground. If the dome light has a built-in switch, that switch also provides a ground.