|
|
Temporarily suspended to cool off
Posts: 316
| Come January the Phoenix will be fully on the roads. So if you see me coming waving my arms out the windows and screaming the brakes are out and the steering wheel has fallen off, get the hell out of the way. |
|
|
|
Veteran
Posts: 295
Location: Tallapoosa, GA |
RUH-ROH!!
Glad to see you're getting her on the road!! |
|
|
|
Expert 5K+
Posts: 7808
Location: Williams California | Post some photos of your car up!!
---John |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13054
Location: Southern Sweden - Sturkö island | Fix your brakes, tighten the steering wheel nut, drive it like you stole it and post some pictures |
|
|
|
Temporarily suspended to cool off
Posts: 316
| Well I THINK I fixed the brakes... but... I fixed it so... you know... Good thing I looked all that over. The backs were good to go but the front was a freakin' mess! 11x2" on the passenger side and 11x2.5" on the drivers side. The drivers side spindle was all kinds of messed up! My parts car had 11x3" c-body stuff on it, so that's on the car now. Mind you, the only thing I re-used from the parts car were the spindles, backing plates and the drums. Everything else is new.
I took the steering wheel nut off and tried to remove the steering wheel, it wouldn't budge... :/ so i just gave up and put the nut back on because i'm lazy.
Photos.. you guys have seen it in other threads but in case you haven't. Here's Rattle Can.
https://goo.gl/photos/X768pgyxwmH9sYCL7
https://goo.gl/photos/X768pgyxwmH9sYCL7
https://goo.gl/photos/d3AnMem3W4Tk9Y7j7
https://goo.gl/photos/T3Kv61guKHna3TqP7
Before engine bay clean up.
https://goo.gl/photos/SHFTZp55b61SYFb19
After engine bay clean up
https://goo.gl/photos/pELZSWzfBxQuPY9g8
Mice Evicted from Fuel tank
https://goo.gl/photos/MpD9grLJHm7jcHWy7
One F-ed up Spindle
https://goo.gl/photos/oPHggPPpSB32gQBs6
Heads after cleaning, painting and re-lap
https://goo.gl/photos/MpD9grLJHm7jcHWy7
https://goo.gl/photos/siS1Kwt3yo96kVeu9
Anyone have an intake for this?
https://goo.gl/photos/VrnJVEREq8rSe2Ma8 |
|
|
|
Temporarily suspended to cool off
Posts: 316
| Actually I just realized I can share the entire album I made of all the photos I shot of the work I did on the car over the summer. So sit down and have a laugh.
https://goo.gl/photos/6c5jzkkv6MsCLtc17 |
|
|
|
Board Moderator & Exner Expert 10K+
Posts: 13054
Location: Southern Sweden - Sturkö island | Lots of interesting pictures, thanks' for sharing! |
|
|
|
Elite Veteran
Posts: 1102
Location: Hayward, Calif | COOL PICS !! Are those 11 x 3" front Chry brakes ? Jerry |
|
|
|
Expert 5K+
Posts: 8444
Location: Perth Australia | Polybun
I made another thread about the blower (I didnt want to pollute this one )
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=60069&...
|
|
|
|
Temporarily suspended to cool off
Posts: 316
| They are. They were on my Seneca parts car, but the part number on the lower steering arm points to '64 C-body. Honestly I think the 11x2.5" total contact brakes are a better design than the chrysler 11x3 jobs but I use what I have! |
|
|
|
Expert
Posts: 2101
Location: Idaho - where men are men and spuds are spuds | The looks of that thing are "haunting!" It needs a machine gun mounted on the hood with dash-mounted controls. |
|
|
|
Temporarily suspended to cool off
Posts: 316
| M1919 or M2?
The guy I bought the car from has a "gun car", his take on a mad max machine. He's been fired from jobs just for driving it to work! Cops called, spoken too. The cops were actually pretty cool in every case, but the employers fired him anyway! None of the "guns" were even remotely real, just a collection of industrial blower parts, tubing, and wire mesh. Looked real enough to freak people out though!
I should have put guns on my '64 Polara. Remove the emblems at the front top of the fenders and replace them with barrels with flash supressor/compensators sticking out! |
|
|