|
|
Veteran
Posts: 146
 
Location: California | Losing storage... 80 plus MOPAR cars for parts or complete.
Losing storage and will be downsizing 80 plus MOPAR cars. The oldest is 1949 and the newest is 1966, with plenty of 55 thru 61 finned MOPARS. These are mostly parts cars with California rust free sheet metal and plenty of good useable parts. Cars are located in Colton, near San Bernardino, about 1 hour east of LA. In the next 2 to 3 months I will be downsizing to a smaller yard holding about 25 to 30 cars and the rest will end up being parted out, sold as complete units, or eventually scrapped. I also have a large 45 year inventory of 1929 thru 1975 NOS and nice used MOPAR parts that I will continue to sell at our shop. Please e-mail with specific parts requests. For further info best to e-mail grossich@roadrunner.com or call Bob at the shop, Mon. thru Weds. 9 to 4 @(909)825-1231, or Gary @ (951) 662-2868.
OK MOPAR FRIENDS.... Hopefully the 3rd time is the charm!! Been slowly reducing our cars over the past 5 or 6 years from over 200 to about 80. Almost all are parts cars, but there are a few 2 door hardtop bodies. I was reading previous Forwardlook posts from several years back when we had the 200 cars and saw some people were upset that my dad or I didn't get back with them. My sincere apologies to those my father or I didn't get back with previously when we were under the gun to find new storage. As some of you who know me are aware, I don't do this for a living, it's a hobby and my personal passion that got out of control! I own a pizza restaurant as a real full time job, so I'm not always the fastest at getting back to people and my dad tended to forget. Anyway, with the passing of my dad and faced with the loss of yet another storage yard, it's time to thin the herd. I have a complete list of cars and at least one 3/4 picture of each. Please help me to help you with your requests by giving me a SPECIFIC LIST of what you need. I will do the best I can to get back with you in a timely manner.
Special thanks to all my MOPAR friends for their condolences regarding the passing of my dad.
Gary Grossich
 (S Colton Cars5.jpg)
Attachments
----------------
 S Colton Cars5.jpg (55KB - 951 downloads)
|
|
| |
|
Extreme Veteran
Posts: 480
Location: The Great Northwest | Gary,
I would be interested in any options available for a 1961 New Yorker. Sometimes 60 or 62 will work as well. Regards,
Arland |
|
| |
|
Veteran
Posts: 146
Location: California | Hey Arland,
Have about ten 1960-62 Chryslers, including a 61 New Yorker 4 door HT, but I need to know specifically which options you're looking for.
Thanks,
Gary |
|
| |
|
Extreme Veteran
Posts: 480
Location: The Great Northwest | PM Sent |
|
| |
|
Veteran
Posts: 281
Location: CEMENT CITY MICH. | Do you have any 1960 Valiant top front fender trim?
Swanny |
|
| |
|
Expert
Posts: 1886
 
| I need a front clip for a 57-58-59 Chrysler 300 letter car. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Mike,
Sorry, can't help you on that, but I do have an NOS 57-58 300 decklid with correct holes for the 300 emblem.
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Swanny,
Are you talking about front fender top "spears" I don't think I have any of those in my inventory.
Gary |
|
| |
|
Extreme Veteran
Posts: 480
Location: The Great Northwest | Gary,
Did you receive my PM with the parts list?
Arland |
|
| |
|
Expert
Posts: 4109
Location: Connecticut | Gary, Check your inbox. Thanks, Ron |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Ron,
Didn't see anything from you. Can you e-mail me again? Thanks,
Gary |
|
| |
|
Expert
Posts: 4109
Location: Connecticut | Gary - I sent you a PM. Go to the top of this page. Click on 'inbox'. It should be there. Let me know if you still can't see it. Thanks, Ron |
|
| |
|
Expert 5K+
Posts: 6552
Location: Newark, Texas (Fort Worth) | How much do you want for all of it? Marc. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Ron,
Didn't know that feature existed. No wonder why some people said I never got back to them several years ago when I posted the cars, I never saw their PM's!!
Thanks for the help and advice.
Gary
Attachments
----------------
South Colton Cars By Make & Year.numbers (79KB - 834 downloads)
|
|
| |
|
Veteran
Posts: 157
Location: bountiful, Utah | Gary,
I just sent you a PM. I met your Dad a long time ago at Pomona. He invited me over to his home and showed me his amazing collection. I will always remember his kindness. I will miss him!
Scott Spencer |
|
| |
|
Elite Veteran
Posts: 716
| Gary I've sent you an email directly for some stuff for a 58 Ply Bel coupe. No hurries and thanks. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Scott,
Thanks, my dad was always such a giving person. He LOVED showing people his stuff and giving them tours of the shop. He came from an era before money really became involved in the hobby, back in the day when another car guy would stop by needing something and you'd just give it to them, and figure if you needed something in the future they'd do the same for you! As a teenager he told me "old cars are good therapy" and I never forgot his advice!! As the years went by and we accumulated cars and inventory, along with shop employees and other overhead, we had to start charging the "going rate" for things. I eventually started selling on e-bay (DPCDFAN)and let the buyers determine the market price for parts, as I always enjoyed buying way more than selling. Anyway, thanks again for the kind words about my dad!! |
|
| |
|
Expert 5K+
Posts: 8445
Location: Perth Australia | Thanks for the reply
I dont think theres much on the dodges for me (interior and very good bling)
|
|
| |
|
Elite Veteran
Posts: 1175
Location: D-70199 Heslach | Hi Gary,
I got one of your last downsizing in 2007/2008, the car is still in restoration.
Sad that you have to downsize again.
The list from 2007/2008 is here http://www.forwardlook.net/forums/forums/thread-view.asp?tid=13845
but no idea, which car's you still have.
Good luck
ToM
by the way, I am looking for a 57/58 DeSoto/Chrysler Flite/NY 2drht
|
|
| |
|
Expert
Posts: 3156
Location: NY & VT | Hey Gary!
Sent a PM to you!
Roger in NY |
|
| |
|
Extreme Veteran
Posts: 531
Location: Park Hills, KY | Gary,
I sent you a PM about needed items for my 60 Windsor. Thanks in advance!!!! |
|
| |
|
Elite Veteran
Posts: 1111
Location: Ocala, Florida | Gary, PM sent for '58 and '61 Plymouth stuff. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Jari,
Sorry, can't help on the 61 parts. On the 57 Desoto dual headlight parts, what exactly are you looking for? The inside part that holds the bulbs, the cast piece the headlight bulbs go thru, the outer pot metal trim rings, or the entire assembly?
Regards,
Gary
 (1957 Des F:Flite.jpg)
Attachments
----------------
1957 Des F:Flite.jpg (89KB - 830 downloads)
|
|
| |
|
Extreme Veteran
Posts: 531
Location: Park Hills, KY | Gary,
Do you have any photos of your 1960 chryslers?? I left you a message.
Thanks in advance! |
|
| |
|
Veteran
Posts: 146
Location: California | Hey Chris,
Please send me an e-mail. Thanks,
Gary
 (1960 Chry A:C.jpg)
Attachments
----------------
1960 Chry A:C.jpg (85KB - 828 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi Tom,
Here is the only 57/58 Chrysler or Desoto 2 door HT left.
Regards,
Gary
 (1958 Chry Windsor 2 Dr HT.jpg)
Attachments
----------------
1958 Chry Windsor 2 Dr HT.jpg (89KB - 861 downloads)
|
|
| |
|
Elite Veteran
Posts: 1175
Location: D-70199 Heslach | hi Gary,
many thanks for the windsor picture, but little much to work for me.
/ToM |
|
| |
|
Elite Veteran
Posts: 827
Location: tailFinland | netparts - 2013-09-16 9:53 AM
Hi Jari,
Sorry, can't help on the 61 parts. On the 57 Desoto dual headlight parts, what exactly are you looking for? The inside part that holds the bulbs, the cast piece the headlight bulbs go thru, the outer pot metal trim rings, or the entire assembly?
Regards,
Gary
Hi Gary. I Think you got them all in this picture. I'm gonna need entire assemblies.
I´ll get back on saturday when I know more.
Jari |
|
| |
|
Elite Veteran
Posts: 982
Location: Upper Hunter NSW Australia | PM sent Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Here is a pic of one of the 59 Dodges
 (1959 Dodge CR 4 Dr Sedan.jpg)
 (1959 Dodge CR 4 Dr Sedan2.jpg)
Attachments
----------------
1959 Dodge CR 4 Dr Sedan.jpg (98KB - 848 downloads)
1959 Dodge CR 4 Dr Sedan2.jpg (92KB - 869 downloads)
|
|
| |
|
Regular
Posts: 95
Location: Lake George NY | Do you still have a 55 chrylser? Please let me know I am in the need of a few parts to complete my project |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
I don't have a 55 Chrysler parts car, but do have 2 55 Desotos in the yard. I do have 55 Chrysler parts. If you send me a soecific list of your needs I can check it out and get back with you.
Thanks,
Gary
 (1955 Desoto 2 Dr HT.jpg)
 (1955 Desoto 2 Dr HT2.jpg)
 (1955 Desoto 4 Dr HEMI.jpg)
 (1955 Desoto 4 Dr HEMI2.jpg)
Attachments
----------------
1955 Desoto 2 Dr HT.jpg (95KB - 815 downloads)
1955 Desoto 2 Dr HT2.jpg (84KB - 871 downloads)
1955 Desoto 4 Dr HEMI.jpg (74KB - 775 downloads)
1955 Desoto 4 Dr HEMI2.jpg (73KB - 815 downloads)
|
|
| |
|
Regular
Posts: 97
Location: Queens NY | Hi. Would like to know if you have a drivers side vent window assembly from a 1957-59 Dodge Plymouth, or Chrysler, hardtop |
|
| |
|
Extreme Veteran
Posts: 314
Location: San Antonio Tx | Still chasing the rear passenger side door tirm for 60 Dodge Pioneer |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
All 57 hardtops, except Imperial, along with 58 Plymouth hardtops have one style vent frame and 58 and 59 Hardtops,(except Imperials and 58 Plymouth) use a different style. Which car and year do you have?
Thanks,
Gary
 (1957 Chrysler Saratoga 4 Dr HT.jpg)
 (1958 Chrysler Windsor 4 Dr HT Wht.jpg)
Attachments
----------------
1957 Chrysler Saratoga 4 Dr HT.jpg (65KB - 901 downloads)
1958 Chrysler Windsor 4 Dr HT Wht.jpg (89KB - 882 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi Kowabunga Buffalo Bob!
I'll have to check on the rear door moulding for your 60 Dodge. Can't tell from any of my pics.
Regards,
Gary
 (1960 Dodge 4 Dr.jpg)
 (1960 Dodge 4 Dr2.jpg)
Attachments
----------------
1960 Dodge 4 Dr.jpg (94KB - 886 downloads)
1960 Dodge 4 Dr2.jpg (90KB - 890 downloads)
|
|
| |
|
Member
Posts: 28
Location: Edmonton AB Canada | Hello Gary,
I am new to the group and have a 57 Custom Royal Lancer and need some of the side trim and emblems. I think looking at your pictures that most of yours may be gone, but thought I would ask anyway.
I need the trim that goes on the roof, above the door and quarter window, both sides.
Also the wider CRL trim along the lower edge of the fin, both sides.
Possible the rear window trim (I am also getting a 2 dr sedan, which has most of this window trim, but I have not picked it up yet, and I am not sure if it would be the same)
Also the Custom Royal script, both sides
Right inner door panel, or the trim off it.
D500 emblem?
Rear quarter emblems?
Rear wheel well rock guard moldings
One bumper tooth. (right outer if it matters)
I know this is a long list, and some of this stuff may be the first items gone, but if you have anything, please let me know. I think this was someone else's parts car, but I am trying to save it.
Thank you, Ed. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Ed,
What body style is your car? When you say Lancer, that would make it either a convertible or either a 2 or 4 door hardtop. The only parts car I have left is a Custom Royal 4 door sedan, but I have lots of parts off of cars we parted over the years as we have restored 2 Custom Royal converts and several 2 door hardtops. Let me know which body style you have and we can go from there. My e-mail address is grossich@roadrunner.com.
Thanks,
Gary
 (1957 Dodge Custom Royal.jpg)
 (1957 Dodge CR 4 Dr Sedan.jpg)
 (1957 Dodge CR 4 Dr Sedan2.jpg)
Attachments
----------------
1957 Dodge Custom Royal.jpg (91KB - 905 downloads)
1957 Dodge CR 4 Dr Sedan.jpg (86KB - 823 downloads)
1957 Dodge CR 4 Dr Sedan2.jpg (88KB - 852 downloads)
|
|
| |
|
Member
Posts: 28
Location: Edmonton AB Canada | Sorry for not being completly clear Gary, it is a 2 door hardtop.
Thanks for the quick reply! |
|
| |
|
Regular
Posts: 95
Location: Lake George NY | Parts needed for my 55 Chrysler front wheel grease caps one or both im not sure maybe the same for a 2 door 55 Desoto but looking for the rear courtesy light lens they are round front seat handle to move seat forward and back sunvisors for recovering if you can help let me know my email grubin648@yahoo.com Gary |
|
| |
|
Regular
Posts: 78
Location: Ipswich UK | Hey Gary
Do you have a '59 Plymouth passenger side front fender??
Mitch |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Mitch,
I don't think so, but I'll take a look. Just stripped out and scraped the only 59 parts car I had left. Still have my 59 Sport Fury convert. I've owned for the past 25 years.
 (1959 Ply 4 Dr.jpg)
Attachments
----------------
1959 Ply 4 Dr.jpg (108KB - 849 downloads)
|
|
| |
|
Member
Posts: 49
| Hi-
I need a windshield for a '57 Dodge Coronet convertible. Interchanges with 2dr HTs or other convertibles in '58 and '59 as well?
Thanks.
Wayne |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Wayne,
You're correct 57 thru 59 converts will interchange with 58 and 59 2 and 4 door hardtops, except 58 Plymouths. Sorry, don't have one. Best bet would be to buy a new, reproduction from Timo Taskinen ? in Riverside, Ca.
Best of luck,
Gary |
|
| |
|
Elite Veteran
Posts: 1018
Location: Milwaukee Wisconsin | I notced in several pics that some of these cars had all the glass intact then others show all the glass is broken out .. Why destroy all that nice glass ?
vandals? |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
Yes, it's hard to have anything anymore. In the past 6 months kids have gotten in the yard and broken virtually every piece of glass. Very depressing…. |
|
| |
|
Elite Veteran
Posts: 1018
Location: Milwaukee Wisconsin | sorry to here that netparts .
john |
|
| |
|
New User
Posts: 4
Location: Los Angeles | Would you happen to be parting out a 61 Dart Seneca (pioneer, phoenix) ? |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
Sorry, don't have any 61 Dodge parts cars, but do have some NOS and used parts.
Regards,
Gary
|
|
| |
|
Member
Posts: 37
Location: Vale, OR | I've got a '55 Coronet 2 door hardtop. Do you have any parts or cars? I can give you a list if you have anything. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
Yes, I have several 55 Dodges and lots of parts.
Regards,
Gary
 (1955 Dodge 2 Dr HT.jpg)
 (1955 Dodge 4 Dr.jpg)
 (1955 Dodge 4 Dr2.jpg)
 (1955 Dodge CRL 2 Dr HT.jpg)
 (1955 Dodge CRL 2 Dr HT2.jpg)
 (1955 Dodge CRL 2 Dr HT3.jpg)
Attachments
----------------
1955 Dodge 2 Dr HT.jpg (87KB - 770 downloads)
1955 Dodge 4 Dr.jpg (87KB - 747 downloads)
1955 Dodge 4 Dr2.jpg (93KB - 720 downloads)
1955 Dodge CRL 2 Dr HT.jpg (82KB - 739 downloads)
1955 Dodge CRL 2 Dr HT2.jpg (84KB - 697 downloads)
1955 Dodge CRL 2 Dr HT3.jpg (76KB - 734 downloads)
|
|
| |
|
Member
Posts: 37
Location: Vale, OR | Very nice. I'll put a list together today. |
|
| |
|
Member
Posts: 37
Location: Vale, OR | I sent ya a PM. |
|
| |
|
Member
Posts: 37
Location: Vale, OR | Did ya forget about me? |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Greg,
No, I haven't forgot ya, just took a day to two off to celebrate the New Year. Also own a pizza restaurant which is my real job. LOL |
|
| |
|
Member
Posts: 37
Location: Vale, OR | In that case, take your time. I own a restaurant myself and I understand completely. |
|
| |
|
Veteran
Posts: 146
Location: California | Greg,
Yep restaurants…. a seven day a week occupation!! |
|
| |
|
New User
Posts: 2
| I am interested in your 62 imperial convertible, or parts. I have a list. Send me your phone number
Arthur
919-630-0158
emmd61@yahoo.com |
|
| |
|
New User
Posts: 3
Location: TABERNACLE NJ | Hello,
I'm looking for something simple but elusive. I need an original oil level dipstick for my '56 Fireflite. Any chance you have one? The aftermarket ones leave a lot to be desired. Thanks. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Arthur,
Cell phone (951)662-2868
e-mail grossich@roadrunner.com
Regards,
Gary
 (1962 Imp 2 Dr Conv.jpg)
 (1962 Imp 2 Dr Conv2.jpg)
Attachments
----------------
1962 Imp 2 Dr Conv.jpg (76KB - 828 downloads)
1962 Imp 2 Dr Conv2.jpg (81KB - 748 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
I'll check and get back with you if I have one.
Gary |
|
| |
|
Expert
Posts: 1351
Location: Valley Forge, Pa. | Hi Gary,
I'm glad you're still following this thread. I can't remember if I asked this before but it doesn't hurt to try. It looks like there may be a Suburban way in the background of your first pict? If so or if not, do you have any 1960-61 Suburbans? Preferably a 60 Plymouth?
If not, thanks anyway for your time and HAVE A GREAT WEEKEND!
Karl. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Karl,
Already parted out the 60 Plymouth 2 door wagon but kept as many parts as I could. what do you need?
Thanks,
Gary |
|
| |
|
Elite Veteran
Posts: 673
Location: Malung, SWEDEN | Gary!
Thanks again for great hospitality.
At the moment we are in Bakersfield, heading to Vegas.
Take care.
Magnus |
|
| |
|
Veteran
Posts: 146
Location: California | Magnus,
Hope you guys have a great time in Vegas.
Gary |
|
| |
|
Elite Veteran
Posts: 673
Location: Malung, SWEDEN | Hi Gary! This is Hollywood, Vegas was even worse ...  :)  
Email sendt. |
|
| |
|
Elite Veteran
Posts: 1172
Location: bradenton florida | looking for a frame that will fit a 58 firesweep one with a good floor and trunk bottom attached would be great. also a 2 dr front seat. |
|
| |
|
Veteran
Posts: 146
Location: California | Ouch… just scrapped a 57 Firesweep frame yesterday. Save the floors and rear trunk pan clip. Still have a 58 Windsor 4 door HT. Should have the same frame.
Regards,
Gary
|
|
| |
|
Veteran
Posts: 259
Location: Hinnerup, Jylland (Jutland), Denmark | Hi Gary !
Do you have parts for a '58 Windsor 2 dr.ht., or a '64 Dodge 440 2 dr.ht. ?
Torben
58WinddsorDartline |
|
| |
|
Member
Posts: 37
Location: Vale, OR | Hey Gary, any chance you could help me out on the list I pm'd ya back in January? |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | I sent an email about some parts some time ago with no response.. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi David,
I looked all thru this thread and didn't see a posting from you until this one. Did you send me a PM at some point? If so, maybe you can send it again.
Thanks,
Gary
|
|
| |
|
Expert 5K+
Posts: 5139
Location: cornpatch county, Southwest IOA | Do you have some exterior trim for a 56 Chrysler 2 dr hdtp? The three "stars "on each side C pillar......................................MO |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | netparts - 2014-03-08 11:57 PM
Hi David,
I looked all thru this thread and didn't see a posting from you until this one. Did you send me a PM at some point? If so, maybe you can send it again.
Thanks,
Gary
I sent an email. Ill send a PM. |
|
| |
|
Member
Posts: 37
Location: Vale, OR | Gary, I never got a response from you. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Greg,
Please resend your e-mail with parts request. Must be in the "land of the lost"
Thanks,
Gary |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | netparts - 2014-03-14 10:49 AM
Hi Greg,
Please resend your e-mail with parts request. Must be in the "land of the lost"
Thanks,
Gary
I'm still waiting for a response too, after an email and a PM. |
|
| |
|
Member
Posts: 37
Location: Vale, OR | netparts - 2014-03-14 7:49 AM
Hi Greg,
Please resend your e-mail with parts request. Must be in the "land of the lost"
Thanks,
Gary
Email sent. Thank you Gary. |
|
| |
|
New User
Posts: 1
| how much for the 57-58 plymouths? |
|
| |
|
Veteran
Posts: 146
Location: California | HI,
The 57-58 Plymouths are already gone. I do have all the good parts that were on them if you need any parts.
Gary |
|
| |
|
Member
Posts: 37
Location: Vale, OR | I don't get how you still respond to this thread like you are actively trying to sell anything when I have done everything but BEG you to actually sell me something!!?? Has anybody here actually bought anything from this guy? |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | silvertonguedevil - 2014-04-10 10:08 AM
I don't get how you still respond to this thread like you are actively trying to sell anything when I have done everything but BEG you to actually sell me something!!?? Has anybody here actually bought anything from this guy?
Same thing for me. I get the feeling this is some kind of weird joke. I called him on the phone, but got no answer... I sent two emails, then he came here and wrote that I should send a PM, which I did... but I never got an answer whatsoever, so I'm done trying.
Edited by soiouz 2014-04-11 11:59 AM
|
|
| |
|
Member
Posts: 6
| Looking for tailgate, ds rear door, ds rear fender, ds tail light assy. For an '59 dodge Sierra custom classic wagon. Also possibly ds rear quarter glass and windshield, if I do not chop the top.
olearyneil@hotmail.com
Thanks
Neil |
|
| |
|
Regular
Posts: 92
| Hey Gary,
I need windshield and rear window molding clips for a 1956 Desoto.. I believe Chryser/dodge are the same. |
|
| |
|
Elite Veteran
Posts: 792
Location: Buena Park, CA | He used to be super responsive and I have met him in person . . . really really nice guy. But I have also pm'd and emailed several times over the last month with no response. I hope nothing bad has happened. Gary had a really knowledgeable (and very old) gentleman that did a lot of the parts work so I fear the worst. Their shop/parts storage is about 1.5 hours from my house so the next time I am in the area I will swing by to check things out. |
|
| |
|
Expert 5K+
Posts: 7819
Location: Williams California | I know Gary quite well, and this is more of a hobby than a profession.
He owns and runs a restaurant full time, and if anyone has been in the restaurant business, they know how much time is left for other things. Not Much.
---John |
|
| |
|
Elite Veteran
Posts: 792
Location: Buena Park, CA | John, totally agree. And Gary had many kind words to share about you when we met. He is a super nice guy who was more than willing to give me a tour of the shop despite the fact that he had just stopped by was in a "rush" at the time. |
|
| |
|
Member
Posts: 15
| I'm looking for a right side exhaust manifold for my 1956 dodge custom royal, 315 poly engine, 270 might work as well.
Thanks, Tom |
|
| |
|
Veteran
Posts: 127
Location: Minneapolis | PM sent |
|
| |
|
Member
Posts: 25
Location: Staten Island, New York | I'm in need of front fenders and a RR door for a 60 Dart Pioneer. I also need 20-30 hubcap clips. I saw some of the cars in the photos have wheels with clips. Any chance od getting clips off some wheels? |
|
| |
|
Veteran
Posts: 259
Location: Hinnerup, Jylland (Jutland), Denmark | Is there still parts left, or is all gone ??
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi Torben,
Still have about 35 cars in 2 storage yards plus tons of parts off the 60 cars we parted out in the past two years. You can see some of my cars on the TV show "Extreme Car Hoarders" which is currently showing in Europe. In the USA the show is called "Rusted Development." Our family and my cars are in the 3rd episode of the season. The episode is called "HEMI Hideaway" and in the episode they build a custom 37 Dodge pickup with a new Challernger hemi and 6 speed trans.
 (S Colton Cars.jpg)
 (SC Small Yard4.jpg)
Attachments
----------------
S Colton Cars.jpg (93KB - 721 downloads)
SC Small Yard4.jpg (101KB - 670 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
Were you still looking for the 60 Dodge parts. Know I have a nice driver fender, would have to check on the RR door. Are you looking for hubcap clips for the 1940s early 50s wheels?
Regards,
Gary
 (1960 Dodge 2 Dr Sedan2.jpg)
 (1960 Dodge 4 Dr.jpg)
 (1960 Dodge 4 Dr.jpg)
Attachments
----------------
1960 Dodge 2 Dr Sedan2.jpg (86KB - 668 downloads)
1960 Dodge 4 Dr.jpg (94KB - 669 downloads)
1960 Dodge 4 Dr.jpg (94KB - 678 downloads)
|
|
| |
|
Member
Posts: 25
Location: Staten Island, New York |
netparts - 2015-09-07 8:21 PM
Hi,
Were you still looking for the 60 Dodge parts. Know I have a nice driver fender, would have to check on the RR door. Are you looking for hubcap clips for the 1940s early 50s wheels?
Regards,
Gary
I'm interested in the fenders and door as long as they are not rotted. I do need the hubcap clips. I would like at least 20. My zip code is 10312 to estimate shipping. I am also looking for a R/R 1/4 panel chrome and "Seneca" name from dash and 1/4 panels. I also need 62 Dart parts. Do you have any 62 Darts. Do you have any radio delete plates for a 60 and a 62? Thanks. |
|
| |
|
Veteran
Posts: 157
Location: bountiful, Utah | Gary,
I enjoyed the episode. That pickup has to be scary fast! How much of your parts collection did you have to give to them? I especially enjoyed seeing a photo of your Dad highlighted in the episode. Are you glad that you did the deal?
Scott |
|
| |
|
Extreme Veteran
Posts: 347
Location: Ocean Park, Washington | I'm looking for both front fenders for a 56 Chrysler Windsor 4 door. I have 2 sets now but both have different but the same problems, if that makes sense. I am watching the show looking at the hemi they brought in for your pickup as I type this. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Scott,
Good to hear from you and glad you enjoyed the episode. The pickup is super fast, but uncomfortable for me to drive. The episode was really about my relationship with my dad and our many years of working together on the cars. Probably shouldn't divulge the particulars, but I did give them several cars (none with fins), no parts. Yes, it was a great once-in-a-lifetime experience and I'd definitely do it again. Everyone connected with the show was wonderful and treated Sandy and I great. We had a Rusted Development viewing party at my restaurant and Rick Dore, along with several guys that built the truck came out. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Scott,
Good to hear from you and glad you enjoyed the episode. The pickup is super fast, but uncomfortable for me to drive. The episode was really about my relationship with my dad and our many years of working together on the cars. Probably shouldn't divulge the particulars, but I did give them several cars (none with fins), no parts. Yes, it was a great once-in-a-lifetime experience and I'd definitely do it again. Everyone connected with the show was wonderful and treated Sandy and I great. We had a Rusted Development viewing party at my restaurant and Rick Dore, along with several guys that built the truck came out.
 (Rusted Development Viewing Party -3.jpg)
 (Rusted Development Viewing Party -25.jpg)
 (Rusted Development Viewing Party -30.jpg)
 (Rusted Development Viewing Party -32.jpg)
Attachments
----------------
Rusted Development Viewing Party -3.jpg (140KB - 663 downloads)
Rusted Development Viewing Party -25.jpg (147KB - 675 downloads)
Rusted Development Viewing Party -30.jpg (149KB - 702 downloads)
Rusted Development Viewing Party -32.jpg (135KB - 793 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
Hope you enjoyed the show. I'll have to make a run out to the storage yard and see if I have a 56 front clip and if so what condition it's in.
Regards,
Gary
Edited by netparts 2015-09-25 11:30 AM
 (Rusted Development Viewing Party -35.jpg)
Attachments
----------------
Rusted Development Viewing Party -35.jpg (165KB - 680 downloads)
|
|
| |
|
Veteran
Posts: 157
Location: bountiful, Utah | I'm glad to hear that it was so much fun for you and Sandy. I need to plan a trip out to Colton soon. I'd love to see that truck!!!
Best regards,
Scott |
|
| |
|
Extreme Veteran
Posts: 347
Location: Ocean Park, Washington | Thanks for the pics. I wondered how you would fit. I love the two-tone. Not crazy about orange but it really works with the black. Does it have a name? |
|
| |
|
Veteran
Posts: 146
Location: California | floyd066 - 2015-09-25 9:53 PM
Thanks for the pics. I wondered how you would fit. I love the two-tone. Not crazy about orange but it really works with the black. Does it have a name?
No haven't named it, my niece said I should call it "The Ernie" after my dad, but that just doesn't work. Very tight squeeze getting into the truck. You probably saw that the moved the firewall back 3" to accommodate the hemi. That much less leg room in an already small cab. |
|
| |
|
Extreme Veteran
Posts: 347
Location: Ocean Park, Washington | That sucks. Maybe cut off your feet and push the pedals with your nubs. |
|
| |
|
Extreme Veteran
Posts: 402
Location: upstate new york | Just stumbled upon this post...are parts still available?
Thanks,
billy |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Billy,
Yes down to 30 mostly complete cars, but did get all the best stuff off the other 50 cars. Let me know what you need.
Regards,
Gary |
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | I also just found this post. I need a 59 Dodge Coronet trunk lid, a 59 Dodge Coronet front left grille center bar(?) I don't know what to call it, but it is the chrome piece in the middle of the grille. There is one on each side of the grille...it has the parking light in it.
also need a set of the chrome letters "CROWN" for a 1960 Chrysler Imperial Crown. Just need one set for one door.
Edited by 69coronet 2015-12-20 5:07 PM
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi.. a couple of questions. Are you looking for the complete driver side grill bar assembly with parking light pod? Also I'm pretty sure 60 Imperials take the small gold letters that spell out CROWN and they do on the front fender, not the door. Just want to make sure we're talking about the same parts.
Regards,
Gary
 (1959 Dodge Custom Royal.jpg)
 (1959 Dodge Wagon.jpg)
 (1960 Imp 4 Dr HT.jpg)
Attachments
----------------
1959 Dodge Custom Royal.jpg (92KB - 701 downloads)
1959 Dodge Wagon.jpg (84KB - 737 downloads)
1960 Imp 4 Dr HT.jpg (63KB - 744 downloads)
|
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | You are correct.
all I need for the 59 Dodge Coronet is the left hand side grille bar that holds the parking light assembly (and of course a good trunk lid as well.) And for the 60 Imperial the small gold CROWN letters that go on the front fender just below the script "Imperial" logo. Thanks, Ron |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Ron,
Sent you a PM.
Regards,
Gary
 (1959 Dodge Deck Lid.jpg)
 (1959 Dodge Deck Lid-2.jpg)
Attachments
----------------
1959 Dodge Deck Lid.jpg (123KB - 700 downloads)
1959 Dodge Deck Lid-2.jpg (124KB - 738 downloads)
|
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | PM and email sent Thanks Ron |
|
| |
|
Expert 5K+
Posts: 6552
Location: Newark, Texas (Fort Worth) | Still waiting for the shipping price on the door panels. Gary. Marc. |
|
| |
|
Veteran
Posts: 146
Location: California | mstrug - 2015-12-24 7:46 AM
Still waiting for the shipping price on the door panels. Gary. Marc.
Hi Marc,
Haven't forgot you. As soon as the stress level goes down in the Grossich household, (Christmas and my wifes Birthday on the 26th) we'll figure out a way to box those door panels properly and get you a total. In the meantime, here's couple of pics of them.
Merry Christmas,
Gary
 (1958 Ply Door Panels11.jpg)
 (1958 Ply Door Panels12.jpg)
Attachments
----------------
1958 Ply Door Panels11.jpg (97KB - 716 downloads)
1958 Ply Door Panels12.jpg (87KB - 723 downloads)
|
|
| |
|
Member
Posts: 25
Location: Staten Island, New York | netparts - 2015-09-07 8:21 PM
Hi,
Were you still looking for the 60 Dodge parts. Know I have a nice driver fender, would have to check on the RR door. Are you looking for hubcap clips for the 1940s early 50s wheels?
Regards,
Gary
Yes I'm still in need of these parts. My zip code is 10312. |
|
| |
|
Expert
Posts: 1497
Location: Fairfax, Minnesota | Hi, I have been trying to find this part for a while. I have a 61 Chrysler Newport 2dr ht (Canadian Windsor) and need the rear seat carpet trim piece that connects to the rear of the sill plate. Some forum members have speculated that a 61 or 62 donor car will work. I am looking specifically for the drivers side, but will purchase both if you have them. See images- 2nd image is actually passenger side, but it shows where the part resides.
Edited by Ray 2015-12-28 9:26 PM
 (sill part.jpg)
 (missing driver side.jpg)
Attachments
----------------
sill part.jpg (206KB - 705 downloads)
missing driver side.jpg (100KB - 718 downloads)
|
|
| |
|
Expert 5K+
Posts: 6552
Location: Newark, Texas (Fort Worth) | netparts - 2015-12-25 12:02 PM
mstrug - 2015-12-24 7:46 AM
Still waiting for the shipping price on the door panels. Gary. Marc.
Hi Marc,
Haven't forgot you. As soon as the stress level goes down in the Grossich household, (Christmas and my wifes Birthday on the 26th ) we'll figure out a way to box those door panels properly and get you a total. In the meantime, here's couple of pics of them.
Merry Christmas,
Gary
Thanks Gary! Marc. |
|
| |
|
Expert
Posts: 1223
Location: Ramona, CA | Hi Gary,
Looking for a pair of rear stone guards for a '60 Chrysler. Might be the same as Desoto and '61 as well. Not sure. Here is a picture of the right side, missing the left one and could get this one fixed but a pair of good ones would be nice.
Also looking for rear quarter spear moldings (pot metal) for 1964 New Yorker Town & Country wagon.
Thanks, Nick.
Edited by NicksGarage 2015-12-29 11:11 PM
 (stone_guard.jpg)
Attachments
----------------
stone_guard.jpg (48KB - 701 downloads)
|
|
| |
|
Veteran
Posts: 155
Location: Hellertown, PA | Hello
I am looking for a 1959 Custom royal, for the junction moldings between the headlight eyebrow and the front fender wheel well molding, for both sides
Gilles in PA
gillesbeneyton@aol.com |
|
| |
|
Expert 5K+
Posts: 6552
Location: Newark, Texas (Fort Worth) | mstrug - 2015-12-29 4:17 AM
netparts - 2015-12-25 12:02 PM
mstrug - 2015-12-24 7:46 AM
Still waiting for the shipping price on the door panels. Gary. Marc.
Hi Marc,
Haven't forgot you. As soon as the stress level goes down in the Grossich household, (Christmas and my wifes Birthday on the 26th ) we'll figure out a way to box those door panels properly and get you a total. In the meantime, here's couple of pics of them.
Merry Christmas,
Gary
Thanks Gary! Marc.
How much is shipping? Thanks Marc. |
|
| |
|
Elite Veteran
Posts: 827
Location: tailFinland | Hi Gary!
Need these trim pieces from any 1960-1964 2d Ht Mopar (stainless)
also same carpet trim pieces as Ray needs
Edited by Adventurer 60 2016-02-28 5:04 AM
 (interior.jpg)
Attachments
----------------
interior.jpg (97KB - 717 downloads)
|
|
| |
|
Veteran
Posts: 211
Location: Suwanee, GA | Hi Gary,
I'm looking for the LH and RH wheel opening trim circled in the photo. I do not need splash guards. Part numbers are 2196180 and 2196181. They were used on 60-61 Plymouth Fury Suburban and 62 Chrysler wagon only. Can you help?
Thanks,
Robert
Edited by Ev's62Chrysler 2016-02-28 8:59 AM
 (wheel opening trim.png)
Attachments
----------------
wheel opening trim.png (191KB - 687 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi Robert,
I've got a 62 Chrysler wagon for parts, but mine's a Windsor and doesn't use wheel lip mouldings. That moulding is going to be real tough to find, but I'm sure you already know that.
Regards,
Gary |
|
| |
|
Member
Posts: 48
| Front bumper for a 55-56 Dodge Coronet? Jerry. 760-417-2654 |
|
| |
|
Member
Posts: 18
| hey mate do you have much for 2 door firedome cheers |
|
| |
|
Veteran
Posts: 146
Location: California | What year Firedome? |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Jerry,
Should be able to help out on the Dodge bumper. I'll give you a call or you can call me @ 951 662-2868.
Thanks,
Gary
 (1955 Dodge CRL 2 Dr HT.jpg)
 (1956 Dodge CR 4 Dr Sedan Gold:Wht.jpg)
 (1955 Dodge 2 Dr HT.jpg)
 (1955 Dodge 4 Dr.jpg)
Attachments
----------------
1955 Dodge CRL 2 Dr HT.jpg (82KB - 659 downloads)
1956 Dodge CR 4 Dr Sedan Gold:Wht.jpg (88KB - 631 downloads)
1955 Dodge 2 Dr HT.jpg (87KB - 647 downloads)
1955 Dodge 4 Dr.jpg (87KB - 642 downloads)
|
|
| |
|
Member
Posts: 18
| hey mate do you have much stuff left for 2 door 59 firedome need some interior parts plus windscreen trims thanks |
|
| |
|
Veteran
Posts: 259
Location: Hinnerup, Jylland (Jutland), Denmark | Hi Gary !
I have seen your photos, you have 2 1958 Windsor's a 2 dr. ht. and a 4 dr. sd. both of them cut up for parts,
what is your price for the remains ? and how soon do you need it to be pick up, if sold ?
Torben
"58WindsorDarltline"
P.S. I just realised that it was on page 1, do you still have them ??
Edited by 58WindsorDartline 2016-09-29 2:08 AM
|
|
| |
|
Member
Posts: 24
Location: belgium | Hello, looking for 58 plymouth center horn silver with power steering letters. Trunk letters, heater box in good condition model 705. Ship to belgium? |
|
| |
|
Regular
Posts: 86
| I am looking for a few 1958 Desoto Fireflite 4 door bits. Hope to find at least "C" or grade 3, "good" condition, servicable overhaul-able parts. Willing to pay fair prices for higher grade of course, but I am within a certain budget, and my girl insists on new fat whitewalls. ISO:
rear window crank handle, front sillplates(may buy new), turn signal switch, and turn switch arm, set of 6 tailights(one broken out, hope to use best of what I can find), rear center bumper, and a left "tree" or chrome triangle above exhaust tip inside of fin surrounding tailights.
These parts are broken or missing, so needed, and hopefully found within next few months for reinstall after rust abatement and fresh paint. |
|
| |
|
Board Moderator & Exner Expert 10K+
Location: .Norfolk..Mafia.. ,England UK | DieselJeep - 2016-10-22 3:56 AM
I am looking for a few 1958 Desoto Fireflite 4 door bits. Hope to find at least "C" or grade 3, "good" condition, servicable overhaul-able parts. Willing to pay fair prices for higher grade of course, but I am within a certain budget, and my girl insists on new fat whitewalls. ISO:
rear window crank handle, front sillplates(may buy new), turn signal switch, and turn switch arm, set of 6 tailights(one broken out, hope to use best of what I can find), rear center bumper, and a left "tree" or chrome triangle above exhaust tip inside of fin surrounding tailights.
These parts are broken or missing, so needed, and hopefully found within next few months for reinstall after rust abatement and fresh paint.
Also give John a shout on this thread mate, Many members here from around the world buy from John (BigM)
http://forwardlook.net/forums/forums/thread-view.asp?tid=6355&start...
. |
|
| |
|
Member
Posts: 18
| hey there do you have any parts for 1959 desoto |
|
| |
|
Member
Posts: 18
| 1959 thanks |
|
| |
|
Member
Posts: 28
Location: Edmonton AB Canada | Hello,
I am looking for the left rear lower quarter side trim for a 59 Sierra wagon. Maybe I might take a spare tire access panel if you have a rust free one that would be better than mine.
I also need the hood side trim, both sides, for a 61 Dodge pick up.
Thank you, Ed |
|
| |
|
New User
Posts: 2
Location: North Carolina | first off sorry for your loss,
second would you happen to have any parts for a 60 fury? 4 door sedan |
|
| |
|
Veteran
Posts: 225
| Hi Gary
PM sent |
|
| |
|
Member
Posts: 44
| Any 57/58 Plymouths? |
|
| |
|
Member
Posts: 27
| Looking for 8 window crank handle escutceons (washers) for my 4 door 59 plymouth.It my also be the same from other forward look cars. 2" o.d. 1/2" center hole made of metal. Thanks Mark |
|
| |
|
Member
Posts: 7
| Looking for the stainless steel rear fender ribbing "also known as sharks grill" for a 1960 Dodge Matador. They were also for a 60 Polara.
Regards,
Gene |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
What 59 Desoto parts do you need? Have parted out several over the years.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Gene,
Used to have several NOS for one side. Sold them all years ago and haven't had any since. Do have some 60 Dodge stuff. Let me know if you're looking for anything else.
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Mikeb - 2017-04-07 12:06 AM
Any 57/58 Plymouths?
No complete ones, but do have alot of parts.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Mikeb - 2017-04-07 12:06 AM
Any 57/58 Plymouths?
No complete ones, but do have alot of parts.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Mikeb - 2017-04-07 12:06 AM
Any 57/58 Plymouths?
No complete ones, but do have alot of parts.
Regards,
Gary |
|
| |
|
Member
Posts: 11
| I have a 1960 Chrysler Windsor and am looking for the side trim pieces that are at the tail end of the side trim pieces that are 90 degrees and connect the top side trim to the one underneath it. Do you have anything?
Thanks, Jon
Edited by jcwer 2017-05-07 3:40 PM
 (60 winsdor side trim.jpg)
Attachments
----------------
60 winsdor side trim.jpg (89KB - 606 downloads)
|
|
| |
|
New User
Posts: 2
| Hi
I'm in need of 58 Plymouth diamond pattern aluminium dash and push button trans plates
Also for my Plodge I need a good left front fender 58 Dodge Coronet
Do you have these? |
|
| |
|
Member
Posts: 11
| Hi
I am looking for a bench seat for a 1960 desoto 4 door |
|
| |
|
Member
Posts: 18
Location: Knoxville, TN | Gary,
I just sent you a PM. Thanks,
Ken |
|
| |
|
Expert
Posts: 2007
Location: Branson, MO | Got any '60 Polara or Matador parts? Body including floors, exterior trim, and interior in particular. |
|
| |
|
Member
Posts: 44
| Do you have any 57 or 58 Plymouth 2dr hdtp's. I need roof trim and any factory a/C parts. Also looking for power window regulators, motors and wiring.
Mike B |
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | I'm still looking for a 59 Dodge Coronet drivers side front parking ight chrome bar. Do you have one? |
|
| |
|
Elite Veteran
Posts: 827
Location: tailFinland | Looking passenger side trim molding (rear corner piece) for 59 Dodge
 (corner trim.jpg)
Attachments
----------------
corner trim.jpg (125KB - 653 downloads)
|
|
| |
|
New User
Posts: 2
| Hellow im looking for parts for my 59 chrysler
I need the trim that holds the emblem on the trunk
Its a lid over the key cylinder
Is that something you have for sale??
Best regards from sweden Skellefteå
Rasmus Eberhardt |
|
| |
|
Member
Posts: 17
| I was curious if you had any of the items below still for a 1957 Dodge 4dr Sedan Royal, Coronet or Custom Royal. I saw a custom Royal with some of the parts below but a lot of water has gone under the bridge since those pics were taken. Below is what I am needing.
1. Passengers side lower front bumper chrome
2. Drivers side rear chrome on rear fender.
3. Drivers side reverse light lens & chrome ring
4. Dodge grill emblem
|
|
| |
|
Veteran
Posts: 225
| PM sent |
|
| |
|
Regular
Posts: 98
| Do you have anything for a 1959 Imperial Crown Southampton? |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Don, Have a few parts. what are you looking for?
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Don, Have a few parts. what are you looking for?
Regards,
Gary |
|
| |
|
Veteran
Posts: 152
| Hi gary
what do you have in 57 desoto any bumpers or 341 cu in parts
maybe rocker floor sections for welding in
thanks graeme
Edited by STOCKHEMI 2019-12-11 9:10 AM
|
|
| |
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | Looking for a drivers side HT vent frame assembly for my 57 Dodge Convertible, HT and convertible I believe have the same frame assembly.
Thanks!
John |
|
| |
|
Elite Veteran
Posts: 1018
Location: Milwaukee Wisconsin | I'm searching for this same corner molding for the drv side. 1959 dodge .... If Anyone has one , contact me here dodge59@wi.rr.com Thanks !
 (corner molding 50%.JPG)
Attachments
----------------
corner molding 50%.JPG (26KB - 548 downloads)
|
|
| |
|
Member
Posts: 22
| Hi, any 58 or 59 Chrysler/Imperial AP (cruise control) parts?
Thanks,
Gary |
|
| |
|
Member
Posts: 17
Location: Fort Collins, Colorado | Gary, I'll be in your area in Mid-February. Do you have any torqueflights (cast iron) for 1960 Desoto/Chrysler? Looking especially for the parking brake drum, shoes and assembly. |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
I do have some auto pilot parts, but don't recall having any for 58 or 59.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
Stop by, I do have several complete 60-61 TF transmissions. Give me a few days notice so I can be sure to be there when you come out.
Regards,
Gary |
|
| |
|
Member
Posts: 5
| have any Powerflite transmissions from a 1956 Imperial. Or any 1956 car with Powerflite tranz?? and looking for mounting hardware to lock on a air cleaner to the 4brl carb for same car? I have the air cleaner but can not lock it down to carb. |
|
| |
|
Expert
Posts: 4109
Location: Connecticut | Does anyone know if Gary still has these parts cars and if it's possible to get ahold of him ? I tried to call but his voice mail is funky and won't record a message. Ron |
|
| |
|
Expert 5K+
Posts: 7819
Location: Williams California | ronbo97 - 2022-09-20 7:10 PM
Does anyone know if Gary still has these parts cars and if it's possible to get ahold of him ? I tried to call but his voice mail is funky and won't record a message. Ron
Ron,
The parts cars are lo9ng gone, but many good parts were saved from them. Gary is extremely busy with his business and family, so often has no extra time for the parts.
---John |
|
| |
|
Member
Posts: 5
| Do you have a 56 DeSoto wagon? |
|
| |