|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | Extremely rare and hard to find three piece set of anodized aluminum under trunk lid trim for the 1958 Plymouth Belvedere & Fury, or dress up your Savoy or Plaza.
A must have for any decent restoration and/or Christine car!
Brand new replacement stock (NRS). Made right here in the USA!
Made to match original OEM specs, contour, shape, size and finish!
The 2 longer trim pieces measure 25 7/8" each in length. Each has one open end for inserting trim clips, and one finished end with a return.
The center cap cover measures 1 1/4", and is drilled for the stainless screw.
Trim clips and stainless screw mentioned above are not included. Thanks for looking!
I couldn't be any happier about how well these came out!
I personally make/add the finished end return to each of the longer pieces, and hand make each 1 1/4" long center cap cover.
These trim sets are in stock and ready to ship with no long wait period, but quantities are limited so don't miss out.
Satisfaction guaranteed!
$199. per set plus $10. for insured priority shipping within the US.
PM me with your email address if your interested.
Thanks,
Ron
Edited by phurious 2012-11-26 2:24 PM
(CIMG9002c.jpg)
(CIMG9003c.jpg)
(CIMG9004c.jpg)
(CIMG9005c.jpg)
(CIMG9006c.jpg)
(CIMG9007c.jpg)
(CIMG9008c.jpg)
(christine (2).jpg)
Attachments ---------------- CIMG9002c.jpg (54KB - 174 downloads) CIMG9003c.jpg (57KB - 168 downloads) CIMG9004c.jpg (47KB - 162 downloads) CIMG9005c.jpg (51KB - 178 downloads) CIMG9006c.jpg (45KB - 164 downloads) CIMG9007c.jpg (53KB - 167 downloads) CIMG9008c.jpg (52KB - 158 downloads) christine (2).jpg (47KB - 220 downloads)
|
|
|
|
Expert 5K+
Posts: 6502
Location: Newark, Texas (Fort Worth) | My Friend Jerry (58Savoy) in Kennedale got these and Loves them. "Better than new", Perfect. Keep up the good work! Any Sport-tone Inserts in the works? Still need a nice 1958 silver rear drivers side. Marc. |
|
|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | mstrug - 2012-12-03 9:54 AM
My Friend Jerry (58Savoy) in Kennedale got these and Loves them. "Better than new", Perfect. Keep up the good work! Any Sport-tone Inserts in the works? Still need a nice 1958 silver rear drivers side. Marc.
Thanks for letting me know Marc!
Feedback left by ebay buyer: "Excellect product!! Thanks very much!!" |
|
|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | Here's what's new: Six (6) brand new black coated wire trim clips are included with each set.
Edited by phurious 2012-12-10 12:30 PM
(CIMG9276c.jpg)
(CIMG9277c.jpg)
Attachments ---------------- CIMG9276c.jpg (58KB - 148 downloads) CIMG9277c.jpg (54KB - 152 downloads)
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | If you want my opinion (but I'm sure you will not), $199 is a ridiculous amount of money for such a small moulding.
We are talking about two small 24" pieces of aluminum, that's all.
I know those things are rare to find in good shape, but come on ... $199 ? Really ?
I, personnally, need a good set for my car, but frankly, I would not give more than a $100 for the whole set.
Edited by Chrome58 2012-12-11 2:30 AM
|
|
|
|
Expert 5K+
Posts: 8444
Location: Perth Australia | I dont think its that bad really
To make up the formers or whatever to produce the stips and then get them anodised in a small production run where you have to outlay all the money up front, with a little for a profit, I say fair go, give the bloke credit for reproducing what is most likely almost impossible to get.
Like everything, if you dont like the price, dont buy it.
There are a lot of things that I would like, but I think they are asking to much, so I just wait until suitable ones turn up or I do with what I have.
Just my 2 cents
|
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | You are right, of course.
Maybe I was in a bad mood this morning ... Anyway.
|
|
|
|
Expert 5K+
Posts: 6502
Location: Newark, Texas (Fort Worth) | It seems fair; About $200 for used pieces if they know what they have is normal. |
|
|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | Chrome58 - 2012-12-11 2:28 AM
If you want my opinion (but I'm sure you will not), $199 is a ridiculous amount of money for such a small moulding.
We are talking about two small 24" pieces of aluminum, that's all.
I know those things are rare to find in good shape, but come on ... $199 ? Really ?
I, personnally, need a good set for my car, but frankly, I would not give more than a $100 for the whole set.
Your opinion is quite welcome, just know that used sets that have damage (dents, dings, scratches and bends) and still need to be re-anodized usually sell for $150-$200 and don't include the 6 mounting clips.
Thanks and good luck! |
|
|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | Still for sale on ebay, and under the Forward Look Network tent in July 2013 at Chrysler Carlisle in PA. |
|
|
|
New User
Posts: 1
| Hi I would like a set of those how can I get them what's the eBay item number? |
|
|
|
Member
Posts: 5
| do you still have any of these left
|
|
|
|
Expert
Posts: 2996
Location: Sept. 1958 | Ron hasn't logged onto here in months, I wonder what's up, haven't talked to him in a while. |
|
|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | Hey guys, they are still available. I haven't been active in the online forums lately. Please email me at rciarmello@gmail.com
thanks! |
|
|
|
Elite Veteran
Posts: 836
Location: Layton, Utah | The price sounds completely fair to me. DeSoto lives!!! |
|
|
|
Veteran
Posts: 191
Location: Nebraska | I was hoping to find this thread again. Are they still available? |
|
|
|
Extreme Veteran
Posts: 591
Location: West Chester, PA | They are still available. I'll have a few sets ready to ship next week. Thanks! |
|
|
|
Extreme Veteran
Posts: 375
Location: milano, italy | Price has now increased to $ 249 including shipping to NJ...and no clips are included. At least, they were not included with the moldings I have just purchased. Asked Ron about this matter, but no reply after 5 days I got in touch with him on Messenger. |
|
|
|
Expert 5K+
Posts: 5006
| That's getting a bit nuts... I'll take a look at what I can find off the shelf... |
|
|