|
|
Veteran
Posts: 157
Location: bountiful, Utah | This weekend there is going to be a 58 Plymouth Convertible auctioned at 776 W. Vine St. Tooele, Utah by Wilbur Auctions (WWW.wilburauction.com) Their phone number is 541-430-2689.
I have seen the car and it appears to be a very solid car with some very old rust repair in the rear quarters. The car is black,(its original color) and has an 80's style velour interior but was originally black and white. It is a factory 350 car and is running at this time. Aparently the owner died and his widow is selling it and a 59 Cad coupe and other cars this weekend.
If you go to www.wilburauction.com there are supposed to be photos of it. This is the only FL car they have, but it is a very good one.
Tooele is about 30 miles west of Salt Lake and is about 15 miles west of the Salt Lake airport. Here is your chance!
Oh, by the way, I have no involvement with the car, the owner or the auction company. The car was at the big Thanksgiving Point car show and swap meet and attracted a lot of positive attention.
It is supposed to be in the high 80's this weekend. You all ought to come over and enjoy.
Scott in Utah |
|
|
|
Elite Veteran
Posts: 988
Location: Kansas City, Kansas | Photo
(58Belvedere Conv-Black-rear.jpg)
Attachments ---------------- 58Belvedere Conv-Black-rear.jpg (162KB - 323 downloads)
|
|
|
|
Expert
Posts: 4110
Location: Connecticut | I'm 90% sure that this car came up for sale a few years ago. IIRC, the widow twisted the arm of her dying husband until he signed the car over to her. At the time this car first came up for sale, she was asking way too much. She was not a nice person, according to my sources.
There is a thread on this car buried somewhere in the archives. It's an Oregon car.
Ron |
|
|
|
Extreme Veteran
Posts: 468
| This car was on Craigslist for 40,000 on Craigslist I went to offer her she was horrible I was soon kicked off her property for not knowing anything about plymouths I offered her an amount I thought it was worth. |
|
|
|
Elite Veteran
Posts: 988
Location: Kansas City, Kansas | Same car?
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=32939&... belvedere convertible oregon black&highlightmode=1#M243981
|
|
|
|
Extreme Veteran
Posts: 468
| Yep that's it! |
|
|
|
Extreme Veteran
Posts: 424
Location: Harrison, NY | Yeah I believe that car was being brokered by several People for that crazy Woman over the past couple of years. The last person who had it was "Classic Car Guy's" in Calif and was trying to get $39K. They tried to pass it off as an orig factory L350 and I believe Folk's here and myself proved differently. I personally ordered the paper from CHS and the IBI Card stated a 318. I offered $28K and they said no even though I showed them it was a 318 car. Nice car for an older resto, although it did have rust issue's in the past.
Joe C NY |
|
|
|
Extreme Veteran
Posts: 468
| I offered 30k and was literally kicked off the property! |
|
|
|
Expert
Posts: 4654
| Christine'sRevenge - 2012-05-29 6:24 PM
Yeah I believe that car was being brokered by several People for that crazy Woman over the past couple of years. The last person who had it was "Classic Car Guy's" in Calif and was trying to get $39K. They tried to pass it off as an orig factory L350 and I believe Folk's here and myself proved differently. I personally ordered the paper from CHS and the IBI Card stated a 318. I offered $28K and they said no even though I showed them it was a 318 car. Nice car for an older resto, although it did have rust issue's in the past.
Joe C NY
Joe, did you get the paperwork from CHS without a title in your name ??? |
|
|
|
Expert 5K+
Posts: 6552
Location: Newark, Texas (Fort Worth) | It went down to $32K at one time. |
|
|
|
Veteran
Posts: 157
Location: bountiful, Utah | The auction firm told me that the widow was ready to sell and that they thought it would bring around 20,000. they even called her to get some answers for me about the original color of the interior. It is my understanding that it is a no reserve auction. I will be there this Saturday and will report the outcome. |
|
|
|
Extreme Veteran
Posts: 424
Location: Harrison, NY | hemidave - 2012-05-29 7:29 PM
Christine'sRevenge - 2012-05-29 6:24 PM
Yeah I believe that car was being brokered by several People for that crazy Woman over the past couple of years. The last person who had it was "Classic Car Guy's" in Calif and was trying to get $39K. They tried to pass it off as an orig factory L350 and I believe Folk's here and myself proved differently. I personally asked "Max" to order the paper from CHS and the IBI Card stated a 318. I offered $28K and they said no even though I showed them it was a 318 car. Nice car for an older resto, although it did have rust issue's in the past.
Joe C NY
Joe, did you get the paperwork from CHS without a title in your name ???
Hi Dave,
The gentleman "Max" that was orid selling the car bought the paperwork at my request as we were working on a deal at $35K however he sent me a copy of the Title, The CHS Paperwork including the IBI card. The CHS paperwork had the same VIN as the pic of the VIN on the car which also matched the title. The Car was a 318. Sorry for the confusion. Once the car came back as a 318, I lowered my offer to $28K which Max said NO!! |
|
|
|
Extreme Veteran
Posts: 424
Location: Harrison, NY | scooter0910 - 2012-05-30 12:20 AM
The auction firm told me that the widow was ready to sell and that they thought it would bring around 20,000. they even called her to get some answers for me about the original color of the interior. It is my understanding that it is a no reserve auction. I will be there this Saturday and will report the outcome.
Will you be purchasing the car at a good price or just going to watch? If you are not buying, maybe I can buy it if it's right? Please let me know. Thanks, Joe |
|
|
|
Veteran
Posts: 157
Location: bountiful, Utah | I am just going to watch. Please feel free to bid away. I have too many cars that require my attention now |
|
|
|
Expert 5K+
Posts: 6552
Location: Newark, Texas (Fort Worth) | Where did he get all those wonderful toys? |
|
|
|
Veteran
Posts: 157
Location: bountiful, Utah | The car sold today for 20,500, to a nice guy from Colorado. i gave him the FL website info and also Mike S and John Q's info. He was very excited to get the car! |
|
|
|
Extreme Veteran
Posts: 468
| Bet the old bat wish she sold it to me know |
|
|
|
Extreme Veteran
Posts: 424
Location: Harrison, NY | Yeah me too... Greedy People never win in the end. HAHAHAHAHAHAHAHAHA Too Bad. |
|
|
|
Extreme Veteran
Posts: 468
| I almost want to call but that she may get on her broom and vandalize my cars !
Edited by 1958 Plymouth Infina 2012-06-02 10:24 PM
|
|
|
|
Location: The Mile High City | scooter0910 - 2012-06-02 12:54 PM
The car sold today for 20,500, to a nice guy from Colorado. i gave him the FL website info and also Mike S and John Q's info. He was very excited to get the car!
Another FL convertible in Colorado! Excellent! Great price. |
|
|
|
Extreme Veteran
Posts: 320
Location: lakeview, ny 14085 | offered 30k and was literally kicked off the property!
-----
what would you offer her today assuming she has come outof her coma? |
|
|
|
Member
Posts: 26
| Howdy Fellas, I am the "nice" guy from Colorado that is the new proud owner of the 58!.....it wasn't my plan to come home with the Belvedere, but sometimes cars find you, you do not find them. This is my first FL driver. For years I have always been a 59/60 GM guy, but really started coming over to the dark side when I helped a buddy a few years back pickup a 57 300. At that moment I started to "see the light" and wisdom of Virgil Exner and that Harley Earl did not have the market cornered on fins.
Anyway, this car really has me jazzed and would really appreciate all the intel I can glean from you experts. I found a website that was a starting point on decoding the VIN and cowl tag, BUT since my cowl tab was on the drivers side, not passenger side, there was no information. From above: The CHS Paperwork including the IBI card....I would really really appreciate getting this info. If there was cost to this, I will happily reimburse, or just point me in the right direction and I will get again.
Very interesting that it was supposed to have a 318. The people involved in the car swore up and down that the 350 was the original motor, but it has a single 4 barrel? I actually have a 58 parts car that has a 318 with a 4 barrel....was the VIN also on the engine block? If it had a 2X4 setup originally, would that be denoted on the tags/paperwork? Or how about power brakes?
I have contacted SMS and they repo the door/quarter panels and seats. They sent me a picture and they look great. I was concerned because it looks like there is some stainless steel bead molding on the door panels that I do not have, but they said that they can supply that as well????? Maybe they are not special SS moldings?
VIN: LPZE 58363
Cowl Tag: LP 55E 7079
The steering wheel is black and white, so I am guessing that the interior and door panels was black and white?
Looking forward to learning about the car, Thanks
|
|
|
|
Expert
Posts: 2996
Location: Sept. 1958 | Congrats on you new purchase! The body tag won't tell you anything about your cars options if built in Evansville, like in your case. Your VIN should read LP2E58363. You can get a copy of the IBM built sheet from Chrysler Historical for your car, information can be found in the forums regarding VIN and tag information. 350s are uncommon in convertibles, and they were all built with dual quads. 318s for 58 Belvederes were either single 2 bbl or single 4 bbl. No VIN is on the engine. The door panels should have mylar strips along the top. |
|
|
|
Wise Old Village Idiot
Posts: 3591
Location: Dellslow, West ("By God") Virginia ! | Well done on yer purchase. A decade ago, I had alomst the twin to yours. 318, black, white top, no wings, inserts, etc. Only at the time, mine was the ONLY surviving factory 'stick' convt. |
|
|
|
Member
Posts: 26
| Thanks for the info. First step is to get the IBM build sheet. That stick convertible must have been something!
Door panel from SMS and note:
This should be the panel you need. We can make pieces that look like the moldings on the lower panels. You won't need to find any.
Doug
Edited by 56newyorker 2012-06-24 12:53 PM
(1958 Belvedere Door Panel SMS resized.jpg)
Attachments ---------------- 1958 Belvedere Door Panel SMS resized.jpg (15KB - 465 downloads)
|
|
|
|
Member
Posts: 26
| I am looking forward to seeing the IBM build sheet to find out the original interior color combo.
to order build card;
http://wpchryslermuseum.org/page.aspx?pid=400
Edited by 56newyorker 2012-06-24 1:26 PM
|
|
|
|
Location: The Mile High City | Nice job, Ken - I think you made a great deal on a rare convertible! |
|
|
|
Member
Posts: 26
| Thanks mike, see your in Denver, have to touch base at some point. Just out driving the car last night, enjoying it. Will order the build sheet in the next couple days for grins. |
|
|
|
Member
Posts: 26
| My plan is to leave the car as a driver, but at somepoint it deserves a real restoration. |
|
|
|
Expert
Posts: 4110
Location: Connecticut | It would be great to see some up to date photos. Engine, exterior, interior, etc.
Ron |
|
|
|
Location: The Mile High City | Sounds good, Ken -
Check out the Forward Look Rocky Mountain Region at
http://www.forwardlook.net/forums/forums/forum-view.asp?fid=50
There are a bunch of images of cars in our area and some general discussion about meets and repair, etc.
Post a thread down there, folks would love too see more of your cars! |
|
|
|
Member
Posts: 26
| Thanks for the denver connection. When I get more time I will try to get some pictures posted thanks |
|
|
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | Can't wait to see it too! I have a bead on a 58 Plym convert east of Denver that I have to pursue now that my 59 is almost done. Keep in touch. We have a Mopar show on August 11th at SouthGlenn Mall in Centennial, Colo or we can see it at the Golden Cruise the first Saturday of each month. (like tomorrow!, 7-7)
See you soon! |
|
|
|
Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil!
Posts: 19146
Location: bishop, ca | Welcome to the 'club', Ken!
Mike, et al, in CO will take care of you and yours.
|
|
|
|
Member
Posts: 26
| Thanks, appreciate the info. I am really enjoying driving the belvedere! |
|
|
|
Member
Posts: 26
| Has anyone out there bought a set of SMS door panels, or seat interior kits? Thanks. |
|
|
|
Expert
Posts: 3581
Location: Blythewood, SC | Lots of people here have been very happy with the quality of SMS. They are slow though. Don't order when you are in a rush. |
|
|
|
Member
Posts: 26
| Thanks appreciate the intel.Need to get that build sheet ordered! |
|
|
|
Member
Posts: 9
| SMS did the door panels on my 62 Dodge. This was in 1994 or 1995. At the time they didn't have a pattern and they said send your old panels and we'll match them. I sent them and they matched them perfectly. Here it is 17 years later and they are still perfect |
|
|
|
Member
Posts: 26
| Looks like I am going to be selling the 1958 Belvedere convertible.....Awesome car and drives great, but thought I could let one of my other ones go, but just cant do it. The car is exactly as it was at the auction, just driven it some this summer and enjoyed it. Looks like "Christines Revenge" and "1958 Plymouth Infina" tried to buy the car and couldn't......if you are still interested, send me a note and we can discuss it! Thanks Ken
|
|
|
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | 56newyorker - 2012-08-20 5:33 PM
Looks like I am going to be selling the 1958 Belvedere convertible.....Awesome car and drives great, but thought I could let one of my other ones go, but just cant do it. The car is exactly as it was at the auction, just driven it some this summer and enjoyed it. Looks like "Christines Revenge" and "1958 Plymouth Infina" tried to buy the car and couldn't......if you are still interested, send me a note and we can discuss it! Thanks Ken
Bummer! I was hoping to have one more FL floating around the Denver area. I hope someone here in town buys it or at least a fellow FL Member to enjoy! |
|
|
|
Member
Posts: 26
| I know how it is when you miss out on a car, so I figure a couple of the FL members that wanted the car is the best place to start. |
|
|
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | If it does not sell, You can store it over at my place in Arvada! LOL |
|
|
|
Member
Posts: 7
Location: Bay Area, California | nowhere near 39k. keep dreaming in this economy!! |
|
|
|
Location: The Mile High City | Hold on to it, Ken! Over the course of the winter, you might gather up the strength to part with that other treasure!
Send me an e-mail or a personal message, Ken. I would like to go out and at least look before it sells to some distant land...
Edited by Lancer Mike 2012-08-23 10:00 PM
|
|
|
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | Yes me too! Mike and I would love to meet you and see your car! |
|
|
|
Expert
Posts: 2244
Location: Yorba Linda, Ca | Problem is, Mike and John, that "Dern Bellybuttonitis" tends to be a "Chronic Disorder".
Those that have it seem to keep having "Relapses".
Best thing is to Push a couple buttons, turn the steering wheel on the Plymouth
take her out and really drive her----this should lessen the effects from the "Above Mentioned Malody".
Gary |
|
|
|
Member
Posts: 26
| Sounds Good for seeing the car! I am traveling to business right now, but will be back this Saturday, possibly Sunday. I will send you a private message. Thanks Ken |
|
|
|
Member
Posts: 26
| Also, posted above: "no where near 39K, keep dreaming in this economy!" I read this, and to me, it implies that that is what I am asking for the car............ ABSOLUTELY NOT! Much, much less! I am not into the whole world knowing what things buy and sell for. If I sell the car as a private transaction in the next couple days, and the new owner wants to tell the world what he paid for the car, that is his business. Obviously, if I "advertise" the car, I will happily post the price............ |
|
|
|
Location: The Mile High City | Fantastic, Ken -
John and I will plan on it. Maybe we can get Ray or Stanford to join in... |
|
|
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | I am game for it.
PS Got my plates and title work done today and I am legal to drive around now. Been kinda illegal for a bit...Oh Well, Drove the car for over an hour today so I am trying to enjoy it before the snow flies! |
|
|
|
Extreme Veteran
Posts: 424
Location: Harrison, NY | Ken I called and message left. Let's talk. Thanks,
Joe C NY
Edited by Christine'sRevenge 2012-08-24 10:23 PM
|
|
|
|
Member
Posts: 26
| I am overseas right now, but can call via on my laptopf not too late......I will retrieve the message....... |
|
|
|
Extreme Veteran
Posts: 424
Location: Harrison, NY | Ken call me, I am up late Bud. Thanks, joe |
|
|
|
Veteran
Posts: 104
Location: FIN land | Here´s some updatie info of this´58 Belvedere conv...it just somehow "landed" on my hands... -You see, I tried to buy it few years back and now when it jumped up to market again I was not able to resist the charm of it although I have too many cars already....It is now located in Houston, Texas, in an overseas shipping agency and just waiting for a shipment to Finland or possibly new owner if someone wants to do a patriotic act and buy this rare ragtop to keep her in the states...
By the way; Ken checked the engine code and it is L-350
|
|
|
|
Elite Veteran
Posts: 1107
Location: Arvada, Colorado (NW Denver Metro Area) | It is a very nice car! very Complete and awaiting a caring owner to take care of her and bring her back to her former glory! I enjoyed looking at it and studying it well. |
|
|
|
Elite Veteran
Posts: 691
Location: Winston Salem, N.C. | hi
what is name of website in Florida that has forward look parts?
thanks
jerry whitfield
jerrybev1@yahoo.com |
|
|
|
Expert
Posts: 1316
Location: Belgium, 40 miles south of Brussels | 56newyorker - 2012-06-24 5:43 PM
Thanks for the info. First step is to get the IBM build sheet. That stick convertible must have been something!
Door panel from SMS and note:
This should be the panel you need. We can make pieces that look like the moldings on the lower panels. You won't need to find any.
Doug
Funny, because I think that this picture given by SMS of a '58 Plymouth door panel is ... mine !
I special ordered mine with that blue/turquoise vinyl (not available as original).
And I sent them all my moldings but the upper one was missing, just like this one.
I got a feeling they were proud of their job and took that picture !
|
|
|