|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Jason in Utah
Email: sas
Remote Name: 198.81.26.74
Date: October 28, 2003
could be, though i think this one will work if i fix the length of the rod on the float, then re-solder, I was able to rebend the pickup tube so the filter will sit correctly and hopefully pick up how it should. (the manual says it should sit 5/8" the float is definetely not brass, some kind of plastic or something. Its in okay shape, but I guess we'll see if it works. this should be fun. Jason
