|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: RON
Email: ARCHANGEL1390@AOL.COM
Remote Name: 64.12.96.78
Date: September 02, 2003
I have a 56 Plymouth Fury with a 58 Chrysler 300D engine (392 cubic inch) and a 3 speed LaSalle transmission in it. The clutch is slipping and probably needs to be replaced. How big a job is that to replace the clutch and are clutches still available for it? The car was built around early 60s. I am very familiar with automatics which I raced for years but when it comes to stick shifts I know very little. Ron Allyn Swartley PS. I also wonder if the crank would accept an older Chrysler torqueflight transmission?
