|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: kcevans
Email: cevans@source.net
Remote Name: 64.42.23.231
Date: April 04, 2003
Does any know if you can change valve cover gaskets without takingoff the ram induction intakes? Has anyone attempted to "sneak" the gaskets out with the clearance alloted by loosening the valve cover? I have a leaking v/c gasket but don't want to disturb the entire gasket if I need to get manifold gaskets at this time. Any help is greatly appreciated.
