|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: erik aase
Email: erikaase@telus.net
Remote Name: 207.6.148.123
Date: January 25, 2003
Time: 02:05:05
hi all, I was wondering if the push button mechanism and tranny cable from a 60 plymouth will interface properly with a 383 motor and tranny from a 60 chrysler. I was originally going to switch the chrysler dash into the plymouth as well but have decided to take the easier and less "glamorous" route due to money and time constraints.Also how hard is it to take the chrysler power steering and power brake set up and stick it into the plymouth. any help would be greatly appreciated. erik
