|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Hank Dozier
Email: dozierhc@aol.com
Remote Name: 192.75.238.204
Date: November 07, 2002
Kenny...Congrats on your new acquisition! You SHOULD be able to use Carter AFB/Edelbrocks on your new toy. The bore pattern is correct, and if the vintage of the manifold is *late* enough, may even have the correct discharge holes into the manifold off the carb pads. If not, you can use spacers (if you want to not modify the manifold) or bore the holes out to clear the AFBs' throttle plates. Linkage you can get from Summit or JEGS. Good Luck!
