|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Hank Dozier
Email: dozierhc@aol.com
Remote Name: 192.75.238.204
Date: October 08, 2002
Roger generally specifies a Bendix dual Master cylinder (Wagner PN F71258) for his conversion kit. This master cylinder is a low profile dual side supply unit, with a bolt-on cover. Approximately same height as the single unit. It is, however, about half again as long, so that could be an issue with your cross-rams. It does come with a boss on the side between the supply fittings to drill and tap for a hydraulic brake lamp switch.
