|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Daven Anderson
Email: l96lfury@springmail.com
Remote Name: 199.174.228.208
Date: August 27, 2002
If you park my '61 Furys (convertible and sedan) next to each other and look at them straight from the side,the higher crown on top of the '60 windshield is obvious. Hollander's Interchange Manual does not say that the two different windshields will physically interchange. If the BASE that the windshields mount in is the same,then it is possible the different windshields could physically interchange. The differing curvature of the tops of the windshields interferes with measurements. The only way to precisely measure the bases would be to remove both cars' windshields,which would be a major hassle! Has anyone on here actually fit the '61 windshield to the '60 or vice versa?
