|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Joe Mac
Email: Mopar58@aol.com
Date: January 17, 2002
I assume you're using an 8 3/4" rear so the driveshaft length is the same. The yoke may be different. I beleieve there three types. Two that use internal snap rings with different size caps and one with external snap rings to secure the rear universal joint. If your u-joint fits into the new yoke you're in luck. If not the yoke will have to be changed. For a good summary of the different configurations go to www.moparmecca.com/tech_abody_834
