|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Daven Anderson
Email: l96lfury@springmail.com
Date: February 15, 2001
Oh,yeah,the spindle height! That's from the top of the spindle itself (where it meets the upper control arm) to the bottom of the spindle itself (where it meets the lower control arm). Needless to say,this measurement is much easier if the spindle is removed from the car! I'd give some thought to the AAJ kit,especially if the front end was in good shape and aligned. Saving labor is always good.....
