|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Bruce
email: Dodge1956@aol.com
Date: April 23, 2000
Time: 12:41:14
Justin: With the handle in front of you extending downward, insert a small, straight screwdriver into the left side between the handle and the escutcheon. Twist the screwdriver to spread the gap and look for the part of the spring clip that goes over the actuater shaft. Place the screwdriver tip perpendicular to this and PUSH IN towards the shaft while wiggling the handle back and forth to pull it off.
