|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Daven Anderson
email: dnadaven@hotmail.com
Date: April 02, 2000
Time: 11:40:29
Yes,if you remove the '61 spindles and replace them with the '66 Fury spindles. Then the whole '66 Fury brake assembly (drum,shoes,wheel cylinder and hardware) should be reconditioned and mounted onto the '66 spindles. The stock '61 wheels should bolt right on when done,the bolt pattern is the same and the drum should clear the inside of the wheel. None of the brake assembly parts interchange between '61 and '66,this is why the spindle is changed (to change the assembly to the newer car's parts).
