|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: loat1e
Email: loat1e@yahoo.com
Remote Name: 207.71.222.151
Date: July 29, 2003
Time: 14:31:32
Is it a single plane manifold? I had this problem too. Single planes just need more flow to begin with.I turned up the idle and everything was fine except I could use a differnt torque converter. If you have a dual plane then maybe a bigger shot would help. Look down the carb with the engine not running and see if it shoots anything in there at all. Also check the vac advance for leak. Simple, I know but sometime I overlook the obvious. Hope this rant helps.
