|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Mopar Randy
Email: RandyBlizzard@aol.com
Remote Name: 152.163.207.212
Date: August 09, 2002
Time: 20:08:24
You might check the master cylinder from a 67 Dodge with drum brakes. Those were a low profile cylinder which should fit under your booster and have the same bolt pattern. The larger disk brake master cylinders, I think, are too tall to fit under the booster. I have not personlly done this conversion, so beware, but I do recall that my 67 Polara had a dual cylinder with shallow wells. Good luck, Mopar Randy
