|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Mopar Randy
Email: RandyBlizzard@aol.com
Remote Name: 152.163.188.200
Date: July 14, 2002
Time: 02:50:20
My understanding is that the hub and drum is a one piece assembly and is not to be separated "in the field". The studs are "Swedged" into the hub and I'm not sure what that process entails. I might suggest contacting an old time tire place or wheel and frame place for suggestions on replacement. I believe that this "swedging" is similar to bucking a rivet and that it is the studs that hold the bub and drum together. Good luck, and please post your final solution! Mopar Randy
