|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Hank Dozier
Email: dozierhc@aol.com
Date: March 05, 2002
Time: 08:32:47
Should work. You will need the aluminum spacer plate for the crank flange distance, but both the crank and the torque converter use the same 8-bolt pattern. You need to make sure the bellhousing of the iron T-flite is for the hemi and not the 350/361 "B" engine. Make sure to use a 57-58 starter, as the ring gear tooth count is different from 56 earlier. Trans cooler lines will have to be special fabricated from Bundy brake line of appropriate diameter and fittings.
