|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: chuck lowe
Email: sprocketbuster@aol.com
Remote Name: 152.163.252.38
Date: September 24, 2003
BOB:::this is what the manual says---TIGHTEN OUTER SHAFT NUT TO 180 FOOT POUNDS.INSTALL COTTERPIN.---at this setting-crown nut can unscrew about one turn before it touches cotterpin---should i shim with washers ??---what could be the problem??---i don't even have a theory---any and all help welcome---later---chuck lowe
