|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: lars
Email: none
Remote Name: 64.12.96.167
Date: August 20, 2003
Since its still nebulous, you have TWO choices. One get another tank, have it cleaned and tested prior to installation. Two pull your current tank, use an alkali solution like caustic soda to soak and attempt to remove the apparently loose interior coating. Proably do it twice. Dry well with compressed air. Test or have it tested. Fix any leaks. Use it without recoating. Timr to act if U wanna drive it before winter...
