|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: chrycopsycho
Email: erikaase@telus.net
Remote Name: 207.6.185.245
Date: July 20, 2003
Trying to get the 383 in my 60 plymouth running right to no avail.It ran strong and beautifully before I transplanted it from the 60 chrysler. After extensive use of "process of elimination" we have determined that the timing mark on the pulley is out by a couple of inches!We removed #1 plug,put our finger in the hole,cranked the engine over and noticed that compression happened noticably after the pulley timing mark passed O degrees.How is this possible and how can one rectify this problem and set the timing accurately.
